![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 2 of 2
Thread: From the scrap bin
-
23rd December 2013, 08:59 PM #1
... and this too shall pass away ...
- Join Date
- May 2012
- Location
- Brisbane (Chermside)
- Age
- 71
- Posts
- 2,042
From the scrap bin
Had four pieces of 45 mm X 45 mm cedar about 400 mm long ... off cuts from the legs for another cabinet. They looked like legs, so ...
Scratched around the shop and found two short boards of camphor laurel and a small piece of 12 mm MDF.
Here it is a day later.
IMAG0459[1].jpg
That solved my last Chrissy prezzie problem.
Lots of you must have made pieces with refugees from the scrap bin and from what you found lying around. Please share them.
-
23rd December 2013, 09:55 PM #2
John. my "shorts" end up on the lathe . . . Bud Vases, Plasticine Rolling Pins etc
Pat
Work is a necessary evil to be avoided. Mark Twain