Results 1 to 7 of 7
  1. #1
    Join Date
    Oct 2011
    Location
    Melbourne
    Posts
    3

    Default Help needed refinishing a few pieces of sentimental value

    Brief intro, I've come here via the metalworking forums. We have a few pieces at home which badly need refinishing they have no monetary value but having come parents and grandparents homes they do have sentimental value to us, unfortunately they are the pieces no one else wanted. We've had them kicking around for a while and I haven't touched them as I'm a bit worried I might do the wrong thing, wrong stripper or sand paper, wrong finish and wreck them completely. So I can do with advice on the correct techniques if anyone can help.
    First is a cabinet, it ended up in shed hence the paint marks it's a solid thing with a plywood front, theres a couple of old holes in the door which I need to correct as well.
    Second is a little occasional table it's a bit wonky and I think I will need to dimantle it to start with.
    Third is a nest of 60's or 70's style teak coffee tables pictured is the worst the others arent as bad I really like the look of these but I'm worried the wrong method could wreck them, wreck all the pieces in fact.
    So if anyone has any advice, please help.
    Ted

  2. #2
    Join Date
    Oct 2011
    Location
    Melbourne
    Posts
    3

    Default

    No Replies.
    What about the old cabinet should I start with paint stripper if so what brand?

  3. #3
    Join Date
    Aug 2011
    Location
    bilpin
    Posts
    510

    Default

    No need for stripper. These items have mainly flat surfaces, so sanding would do the job. Start at 80 grit and work up to 220. You may want to start at 120 grit on the lighter finishes and more delicate surfaces. A lacquer finish would be easiest to apply. Poly would be more durable, but cant be refinished without removal in the future. Should you choose an oil finish, you will need to sand finer,say 480grit.

  4. #4
    Join Date
    Feb 2009
    Location
    Bristol, UK
    Age
    66
    Posts
    0

    Default

    I'd go with sandpaper/abrasive on the painted table as the paint will have settled into the grain.

    But on the other two I'd use a Cabinet Scraper. If you've never used one before, they are not hard to learn to use (sharpening is a different matter) but I'd recommend practising a bit first to get a feel for them.
    Dragonfly
    No-one suspects the dragonfly!

  5. #5
    Join Date
    Jul 2005
    Location
    Oberon, NSW
    Age
    64
    Posts
    0

    Default

    Yeah, a cabinet scraper works wonders.

    But they can also cut surprisingly aggressively, which can lead to hills 'n dales if you're not used to them.

    With minimal woodworking skills I think I'd stick to using a sander for the flats and hand-sanding with a backing rubber for the curves.

    Lots of elbow grease, but with the benefit that any mistakes are minor and easily recovered.

    I'd only go to a stripper if the sanding turns into a nightmare, paper clogging on first contact, etc., but most of those pieces look like they'd have old finishes which should come off fairly straightforwardly.

    The painted table my be the exception, depending on when 'twas painted/what paint was used.
    I may be weird, but I'm saving up to become eccentric.

    - Andy Mc

  6. #6
    Join Date
    Oct 2011
    Location
    Melbourne
    Posts
    3

    Default

    Thank you for replies, I think I will give the cabinet scraper a miss at the moment maybe later when I get a bit more confidence so sanding it is to start with Thanks.

  7. #7
    Join Date
    Mar 2009
    Location
    Hobart
    Posts
    410

    Default

    Not being sure re the timbers from the photos, my take on it, would be with the painted (white) piece to heat gun off the paint, then paint strip using coarse steel wool. The only reason for the heat gun is that it would speed the process up. Mind you, you would need to be careful not to burn the timber below.

    If paint strip only, then use a flat blade scrapper to strip away the paint and then re-apply paint stripper and use coarse grade steel wool to get rid of the remainder. Once cleaned off, neutralise the surface using oxalic acid or alternatively even simply metho with steel wool. Once dry then use an oil based product. Even a Tung oil (commercial) product would be ok. You would need to apply a few coats, rubbing back in between coats.

    Re the other pieces, again and assuming it might have a shellac finish (which has gone off and is very dry), you have two - three options. Sand back as suggested but in some cases from my experience when re-applying a finish such as shellac this can be problematic. If so, either stripping back using metho and coarse grade steel wool and a wash therefter would work. Or alternatively if you wanted to be certain of not having any of the original coat left, you could always paint strip (as explained above, though without the heat gun).

    The point with any of these processes, is that you do need to try and get off as much of the old finish as it will interfere with any new finish, and when using steel wool, always clean the surface thereafter to ensure you don't get steel wool embedded into the wood fibres. It shouldn't be a problem, just be careful.

    Sanding back I normally go from 120 grade (80 being generally IMHO too coarse for most projects, unless a surface is really rough), then up to 220-240 and finish off with 400. I know you can get finer grades but for the majority of projects from my experience these grades simply are not needed.

    Just out of curiosity, what do most guys here seem to use re sandpapers. I only use plaster sandpaper (the white papers), rather than the brown papers for wood. My experience over the past 20 years has shown to me that it is more effective and durable. But perhaps I have this wrong ??

Similar Threads

  1. Finish for old Arm chair - sentimental value.
    By gilbo in forum RESTORATION
    Replies: 2
    Last Post: 13th June 2010, 08:51 PM
  2. Coo Koo Clock Refinishing
    By Ken Weekes in forum RESTORATION
    Replies: 0
    Last Post: 10th August 2009, 04:14 PM
  3. Refinishing or Reviver
    By bward in forum FINISHING
    Replies: 3
    Last Post: 18th March 2009, 03:40 PM
  4. Help needed refinishing
    By brit_in_oz in forum FINISHING
    Replies: 0
    Last Post: 22nd October 2005, 06:22 PM
  5. Deck refinishing
    By jimj in forum FINISHING
    Replies: 2
    Last Post: 20th April 2005, 07:33 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •