Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Aluminium Router Plate insert
-
23rd July 2014, 11:51 AM #1
Aluminium Router Plate insert
Aluminium Router Plate insert, for a home made router table, with four insert rings (23,33,43,53mm openings and 90mm external diameter).
Plate dimensions: 305 x 230 x 6mm thick.
Price is $50, plus postage at cost.
This was made for me by a forum member a couple of years ago, but I have gone down a different path, and so it has never been used. There are some manufacturing scratches which won't affect performance.
It was made to suit a Triton TRA001 (screw holes) but can be modified for other routers.
There is no hole for the above table height adjustment rod, so that would have to be drilled if required.
The rings are secured in place by a couple of small screws (not supplied).
This is not an Auction, just post "I'll take it".
The top of the plate, showing engraved markings:
The underside:
The rings (23,33,43,53mm):
and the other side of them:
-
24th July 2014, 12:01 PM #2Senior Member
- Join Date
- Jul 2008
- Location
- Upper Kedron 4055
- Age
- 82
- Posts
- 143
-
24th July 2014, 12:08 PM #3
Thanks John.
Sold to yachtie.