Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
6th November 2023, 07:07 PM #1Intermediate Member
- Join Date
- Aug 2015
- Location
- Brisbane, QLD
- Posts
- 29
Help with ID for Gunmetal Infill Plane
Howdy Brains Trust
Looking for suggestions on possible makers for this gunmetal infill plane.
I would say that its at least as good a construction & casting of the major makers in the UK ie. Spiers, Mathieson etc. Really unusual back palm/thumb forefinger rest also made from gunmetal. Walnut infill which looks oroginal but has shrrunk in areas.
Any thoughts or suggestions greatly appreciated as I cant find another with the same back rest or lever cap screw.
Cheers Dan
1.jpg2.jpg3.jpg4.jpg
-
19th December 2023, 10:07 AM #2New Member
- Join Date
- Oct 2023
- Location
- Avoca Beach, NSW
- Age
- 55
- Posts
- 3
Not sure who made it. Sometimes the name is very faintly punched into the front of the toe infill. I tend to look for clues by finding a matching levercap screw online. The only ones similar I could find were labelled as Scottish infills (which is the standard fallback position for those they can't identify).