Page 1 of 2 12 LastLast
Results 1 to 15 of 28
  1. #1
    Join Date
    Jun 2006
    Location
    Barboursville, Virginia USA
    Age
    77
    Posts
    549

    Default Small Seppo shed tour

    Well, while everyone is having a smoko at 's, I thought I'd sneak in a few pics of my wee shed. The shed measures about 4.5M by 8.5M.

    Pic 1 is viewing front on. The small table in front is my sheet goods cutting table I banged together from 4X2s and banquet table legs. Pocket screws and no glue, so replacing pieces is easy peasey if they get too tired.

    Pic 2 shows my brilliant Triton Superjaws and behind my assembly table (with Rotex on board). The table is made from Norm's NYW plan--torsion box with MDF top. On wheels for easy mobility. Made to act as an outfeed table when required.

    Pic 3 is my clamp rack (need more clamps! ), also mobile, and the DeWalt SCMS and stand. A couple of storage shelves for odds and sods.

    Pic 4 shows the router table (Rockler top, shop-made stand) CT22, PC compressor, and GMC drill press. PC892 router in the table. That is a Festo OF1000 in the systainer underneath, used for hand routing. Can barely see the GMC DC bag in lower left. Moves between the TS and router table.

    Pic 5 Hitachi contractor-grade TS with Incra Mitre3000 and Incra sled.

    Here and there and piled around are all the portable power tools and nailers. Bosch hand-planer, PC biscuit joiner (for sale, cheap ), a huge Milwaukee hammer drill when serious holes are needed.

    Notice, no jointer, thicknesser or bandsaw. I am edge-jointing using shims on the router table, which works pretty well. Thicknessing with the Bosch planer, which is hit or miss. Bosch jig saw for cutting curved pieces.

    Next major tool: Domino. Due to arrive in less than a month now. After that, a thicknesser, but running out of room. I have a largish tile saw and a small finishing station in the actual garage attached to the house (Shed Annexe). All cars park outside at all times.

    I know it's a mess. Thanks for looking.
    Cheers,

    Bob



  2. #2
    Join Date
    Aug 2003
    Location
    Melbourne - Outer East Foothills
    Posts
    1,557

    Default

    I'd remove the pics before we ban you from the forums for being way too neat and clean.



    Any chance of a video ?

  3. #3
    Join Date
    Jun 2006
    Location
    Barboursville, Virginia USA
    Age
    77
    Posts
    549

    Default

    Quote Originally Posted by Gumby View Post
    I'd remove the pics before we ban you from the forums for being way too neat and clean.



    Any chance of a video ?
    Yes. Actually I had planned a video but my camera (old tape technology) bit the dust. I will do a video as soon as I replace it. No interlude, however.
    Cheers,

    Bob



  4. #4
    Join Date
    Jun 2006
    Location
    East Warburton, Vic
    Age
    54
    Posts
    3,538

    Default

    Looks like a well organized cluttered workshop
    Cheers

    DJ


    ADMIN

  5. #5
    Join Date
    Feb 2006
    Location
    Lindfield N.S.W.
    Age
    63
    Posts
    1,644

    Default

    I agree - looks like a really good 'shop (I wish I had that much room) - the 'mess' is the consequence of it being used...

    Workshops are like desks - a clean one is the sign of a sick mind
    Cheers

    Jeremy
    If it were done when 'tis done, then 'twere well it were done quickly

  6. #6
    Join Date
    Sep 2002
    Location
    Minbun, FNQ, Australia
    Age
    66
    Posts
    1

    Default

    I'm with Gumby on this... where's the bloody sawdust, cobwebs, dead mouse, paint/oil stains & piles of little off cuts?

    Very tidy little outfit, I would NOT fit into it or in with it.

    Up here, (down here for you Bob) we would be VERY nervous about that overhanging branch.... it wouldn't last 5 minutes before it was whipped off & turned into something more useful than a potential hole in the roof.

    What do you think of you Dewalt SCMS?
    Bunnies in Cairns has a couple of 12" ones for $1100 & something maybe $1149 or $1189.
    They have one out on display next to a Makita 10".
    They are big but they look good.
    Cliff.
    If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.

  7. #7
    Join Date
    Aug 2006
    Location
    Sydney
    Age
    65
    Posts
    1,248

    Default Small Seppo Shed Tour???

    Exactly how small are you Bob?????

    Its hard to get any sense of scale from the photos, are we talking Hobbit size here or just plain short ass?

  8. #8
    Join Date
    Jun 2004
    Location
    Port Sorell, TAS
    Age
    59
    Posts
    177

    Default

    I like it Bob!
    The only way to get rid of a [Domino] temptation is to yield to it. Oscar Wilde

    .....so go4it people!

  9. #9
    Join Date
    Oct 2006
    Location
    Tallahassee FL USA
    Age
    82
    Posts
    0

    Default

    Entirely too clean! Totally unacceptable! And you have nowhere near enough clamps. Nice to see a few things on wheels, though. And a desk! With drawers! You've got a bunch of bowls and vases in that branch, too. Now you need a lathe.

    Joe
    Of course truth is stranger than fiction.
    Fiction has to make sense. - Mark Twain

  10. #10
    Join Date
    Dec 2004
    Location
    Toowoomba Q 4350
    Posts
    3,491

    Default

    Very nice setup Bob! That trundle table is great. I based my old outdoor workbench after seeing that episode of Norm's show, except I didn't put wheels on mine.

    cheers
    Wendy

  11. #11
    Join Date
    Jun 2005
    Location
    Sydney
    Posts
    313

    Default

    Maybe the dead mouse is in his hearing protection.

    Nice Festo gear.... do you have the ROS?
    Cheers,
    Clinton

    "Use your third eye" - Watson

    http://www.flickr.com/photos/clinton_findlay/

  12. #12
    Join Date
    Nov 2004
    Location
    Port Pirie SA
    Age
    52
    Posts
    0

    Default

    Nice workshop Bob, dont worry about the "to clean" comments they're just jealous!
    ....................................................................

  13. #13
    Join Date
    Apr 2005
    Location
    kyogle N.S.W
    Age
    50
    Posts
    0

    Default

    What a groovy little shed Bob. Eying off that Dewalt saw of yours I am.

  14. #14
    Join Date
    Jun 2006
    Location
    Barboursville, Virginia USA
    Age
    77
    Posts
    549

    Default

    Quote Originally Posted by Cliff Rogers View Post
    Up here, (down here for you Bob) we would be VERY nervous about that overhanging branch.... it wouldn't last 5 minutes before it was whipped off & turned into something more useful than a potential hole in the roof.

    What do you think of you Dewalt SCMS?
    Bunnies in Cairns has a couple of 12" ones for $1100 & something maybe $1149 or $1189.
    They have one out on display next to a Makita 10".
    They are big but they look good.
    No worries about the branch. It is actually well away from the shed, it's just the camera perspective. That is a maple tree, BTW.

    The DeWalt SCMS is very solid (Model 708). But I'm told the new ones (with side-by-side rails rather than over-and-under) are somewhat less solid.

    Quote Originally Posted by rufflyrustic View Post
    Very nice setup Bob! That trundle table is great. I based my old outdoor workbench after seeing that episode of Norm's show, except I didn't put wheels on mine.

    cheers
    Wendy
    Thanks Wendy. The wheels work a treat for moving around in that small space. Then, just pull the ropes on each end to retract the wheels, lift up on each end to let them down again.

    Quote Originally Posted by Clinton1 View Post
    Nice Festo gear.... do you have the ROS?
    That is a Rotex 150 lying on the assembly table. I currently have only the Rotex, OF1000 router and CT22 vac. Domi will be here soon.

    Thanks everyone for looking.
    Cheers,

    Bob



  15. #15
    Join Date
    Jun 2006
    Location
    Barboursville, Virginia USA
    Age
    77
    Posts
    549

    Default

    Quote Originally Posted by Bleedin Thumb View Post
    Exactly how small are you Bob?????

    Its hard to get any sense of scale from the photos, are we talking Hobbit size here or just plain short ass?
    Now Bleedin', purposely ambiguous. It is either a small Seppo, a small shed or a small tour. Pick one (or two). Without drawing any comparisons to other forumites, let us say that I am not a small Seppo.
    Cheers,

    Bob



Similar Threads

  1. New shed (p2) and new difficulties and ??
    By LeoAU in forum THE GARDEN SHED
    Replies: 5
    Last Post: 22nd January 2007, 02:26 PM
  2. Starting from the Beginning
    By A192K in forum THE GARDEN SHED
    Replies: 22
    Last Post: 18th August 2006, 09:52 PM
  3. BIG MAN IN A SMALL TOWN
    By ken yates in forum JOKES
    Replies: 0
    Last Post: 27th January 2002, 02:36 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •