![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 2 of 2
Thread: Finishing question
-
16th February 2011, 10:58 PM #1
GOLD MEMBER
- Join Date
- Nov 2009
- Location
- Canberra
- Posts
- 87
Finishing question
I am building a bedside table, and am considering how to finish. Is it possible to sand and finish before gluing up, so that finishing can be done on horizontal surfaces, and it is easier to sand between coats? Provided I tape up the tenons and plug the mortises so that they stay clean.
-
17th February 2011, 06:49 AM #2
Yes. Do it often that way myself, a final finishing coat when its all together.
Similar Threads
-
Finishing question with a twist
By Eldanos of KDM in forum FINISHINGReplies: 15Last Post: 13th August 2010, 06:57 PM -
Finishing Formula Question
By Rock in forum FINISHINGReplies: 3Last Post: 2nd September 2009, 08:08 AM