![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 15 of 24
Thread: T & W W W Show Melbourne pics
-
18th October 2013, 09:02 AM #1
T & W W W Show Melbourne pics
G'day all. About to head to the show. Helped with some set up on Wednesday and met a few more forumites.
Here are a few pics of the day and there will be more of the show as it is over the weekend. Feel free to add your own pics and what have you.
I was helping Big Stan so here are a couple of his stands to start with
Not sure how a panoramic pic comes up so here's hoping
-
18th October 2013, 09:04 AM #2
This is the uBeaut stand right next to our woodworking forum stand
-
18th October 2013, 09:08 AM #3
And here are a few more as of late Wednesday.
A9 John at Tasmanian Timbers, near Big Stan
Jim Carrols
Some music
And there will be more to come. Hope to see you there
-
18th October 2013, 11:40 AM #4
Theo Haralampou
Doing one of his various Woodturning demos
This time round he is doing chuppa chup holders, Christmas trees, cup cakes and a variety of other stuff
-
18th October 2013, 11:41 AM #5
Triton is set up
-
18th October 2013, 11:44 AM #6
Sam and Melissa at Swarts Tools
-
18th October 2013, 11:52 AM #7
Carb-i-tool. Nice range of cutters and other accessories.
-
18th October 2013, 12:00 PM #8
Great set of photos on the setup.
-
18th October 2013, 12:29 PM #9
Stan at his craft
-
18th October 2013, 03:20 PM #10
Thanks heaps Dave, great photos,
Makes one feel like they were are the show; only wish.
Cheers, crowie
-
18th October 2013, 03:24 PM #11
Ken Wraight at his craft
-
18th October 2013, 03:42 PM #12
Vermec.
Now if I had some serious dollars to spend this is where I would be !!!!
-
19th October 2013, 08:36 AM #13
For those who have not been before . . . here is where it is at.
Just getting ready to make my way for another day now.
-
19th October 2013, 10:17 AM #14
Australian Tool Makers strutting their stuff again.
I sure as he'll would not say no if someone gave me some of their stuff
No favouritism. So much quality stuff every where.
-
19th October 2013, 11:03 AM #15
Some were asking about twin blade saws on another post.
Here is some info by way of pics from the Swarts Tools stand at the Melbourne show.