![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
-
3rd July 2009, 07:20 PM #1
aluminium sliding door installation
Hey Guys
just got some sliding doors delivered today from gjames. the doors fit and look fine but the install looks to be a litte different to that of the windows that i installed a couple of weeks back.
both the windows and doors have been ordered with the reveals already installed. the windows had loads of reveal exposed so i could pop a nail in through it to the stud behind for installation. worked great
however the door tracks and framing seem to take up most of the width of the reveal and i cant see any easy way to fix the new doors to the stud without going through the aluminium, through the reveal and into the stud (which i have been advised not to do). there is about 10mm of reveal exposed on the inside but that 10mm is actually overhang for internal lining such as plaster.
whats the best way to go?
thanks in advance
Quintin
Read and reply to the full thread at RenovateForum.com....
Similar Threads
-
replacing roller door with sliding glass door
By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 1st February 2009, 11:20 AM -
Aluminium Sliding door
By joe F in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 2Last Post: 7th March 2008, 04:43 PM -
roll-a-door installation
By Ivor in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 12Last Post: 15th June 2007, 09:45 AM -
door frame installation
By Mack_187 in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 4Last Post: 11th June 2007, 06:43 PM -
Sliding Door Installation - Vantage
By DOZ in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 4Last Post: 26th August 2006, 02:20 PM