Results 1 to 4 of 4
Thread: B&D Rolladoor
-
17th February 2006, 08:05 AM #1
B&D Rolladoor
The automatic rollerdoor played up for the son yesterday, became jammed then loose then jammed then twisted etc so he said.
When I check it works ok but stops about 3/4 up and when going down it hits the bottom, overdrives and then reverses as if hitting something.
The range of up and down stops has shifted somehow. Does anyone know how I go about resseting the limits, have not got up there to look yet so just hoping someone can point me in the right direction.
-
17th February 2006, 01:10 PM #2SENIOR MEMBER
- Join Date
- Aug 2002
- Location
- Boyne Island, Queensland
- Age
- 52
- Posts
- 176
-
17th February 2006, 01:12 PM #3
Thanks Dan
-
17th February 2006, 10:30 PM #4GOLD MEMBER
- Join Date
- Oct 2003
- Location
- Sydney,Australia
- Posts
- 42
Our roller door did that - usually you can fix it by turning off the power at the socket with the door fully one way or the other. There is a 'reset' button on some models too.
Once reset you just run it thru' its paces & it remembers the stops.
Bookmarks