Results 1 to 10 of 10
  1. #1
    Join Date
    Sep 2013
    Location
    Canberra, Australia
    Age
    34
    Posts
    2

    Default G'day from a tiny fibro shack in Canberra

    Hey all,

    Just recently been bitten by the woodworking bug, thanks to that YouTuber-man, Steve Ramsey. Searching for various things on the subject of woodworking lead me here!

    I'll probably be seeking guidance from your good selves a lot in the coming weeks, as I attempt my first project in hardwood ever(Tas Oak desktop)... but for this long weekend, I'll just be putting together a little table for behind our front door. Trying to, at any rate.

    I'm pretty limited on woodworking tools and experience... Prepare to laugh at my ineptness and lack of proper equipment.

    Professionally, I'm qualified as an Instrument Fitter, and presently doing a Diploma of Electronics Engineering, whilst working for one of the big Unis, keeping all their old equipment ticking along.


    Anyhow, I'm looking forward to asking some silly questions and getting some not-so-silly answers!


    Cheers,
    Pete

  2. #2
    Join Date
    Apr 2011
    Location
    Pakenham, Victoria
    Age
    53
    Posts
    10

    Default

    Welcome to the forum Pete. I look forward to your posts.

    Danny

  3. #3
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    2,576

    Default

    G'Day & Welcome to a top forum "Pete".
    There are quite a few members in and around Canberra..
    You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
    Make sure you show off your handiwork as everyone loves a photo, especially WIP photos with build notes.
    Enjoy the forum.
    Enjoy your woodwork.
    Cheers, crowie

    PS - No such thing as a silly question but yes some answers can leave a bit on the shelf.....
    besides we all started somewhere at sometime at least as as an instrument fitter you should have a bit of a head start with the tools & know-how...lol..
    Have a look at garage sales, deceased estates, farm clearance sales for old good quality secondhand tools to boost your collection....

  4. #4
    Join Date
    Jan 2011
    Location
    Ormeau, Gold Coast, Australia
    Posts
    203

    Default

    Gidday Pete, welcome aboard and may your journey with us be a pleasant one.
    Regards Rumnut.

    SimplyWoodwork
    Qld. Australia.

  5. #5
    Join Date
    Oct 2003
    Location
    Canberra
    Age
    48
    Posts
    318

    Default

    Hi Pete.

    Welcome to the forums. There are a few of us canberrans around, so sing out if you need advice or if you want to swing round and cut something on the table saw or run it through a jointer or thicknesser.

    Trav
    Some days we are the flies; some days we are the windscreen

  6. #6
    Join Date
    May 2011
    Location
    FRANCE
    Age
    59
    Posts
    1,889

    Default

    Welcomeaboard

  7. #7
    Join Date
    May 2012
    Location
    Canberra
    Posts
    122

    Default

    Indeed welcome.

    There seems to be a great many people from Canberra on the forums! It's a very good sign.

  8. #8
    Join Date
    May 2013
    Location
    Rockhampton QLD
    Age
    69
    Posts
    1,570

    Default

    Welcome to the forum Pete. Ross

  9. #9
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    2,966

    Default

    Welcome to the forum.

  10. #10
    Join Date
    Sep 2013
    Location
    Canberra, Australia
    Age
    34
    Posts
    2

    Default

    Thanks for the welcome guys.

    I got the frames and legs on my skinny little table all glued together today, and also got a coat of her ladyship's preferred flavor of white onto the frame, as seen here:
    20131006_210756.jpg

    I wish I could say it was by design, but by random luck, I spaced the frames precisely the right width and heigh apart to fit our existing shoe rack perfectly... I'll get that all painted white at some stage so it matches.

    The frames and legs are the finest dirt cheap 10MPA 90x35 framing pine, held together with half-lap joints, of varying quality. I've then used 16mm dowels to join the legs and the frames.

    Tomorrow, if I can get out in the yard for a bit more (No shed= work in backyard), I'll try to clean up some pallet wood for a top. Her ladyship initially requested that be painted gold, but I've won a concession back to polyurethane.

    What I'm particularly pleased with is that I've managed most of this with a bag full of the Ryobi One+ tools (The little circular saw did well here) and a $112 909 table saw from Masters. I wimped out in this final stage and borrowed the big Makita sliding mitre saw from work for the legs. If I had the space to store it, a mitre saw would be next on my shopping list!

    Cheers,
    Pete

Similar Threads

  1. G'day from Canberra..
    By ssreddogv8 in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 5
    Last Post: 10th March 2011, 10:11 PM
  2. G'day from Canberra
    By mistertim in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 5
    Last Post: 5th September 2010, 02:18 PM
  3. G'day from Canberra
    By Monstar in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 4
    Last Post: 31st January 2010, 02:40 PM
  4. G'day from trying to be Sunny Canberra
    By DANZAN in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 9
    Last Post: 31st August 2008, 05:49 PM
  5. G'day from Canberra
    By slackboy72 in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 3
    Last Post: 8th August 2008, 11:21 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •