![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 6 of 6
Thread: Resawing beech
-
4th March 2009, 03:06 PM #1
New Member
- Join Date
- Mar 2009
- Location
- hill end
- Posts
- 2
Resawing beech
Hi all, I just joined up. I run an old ferry called Reliance on the Sydney Harbour. Our deck is getting loose and I was going to refasten it the normal way, but have decided to add a ply deck and sheath it with beech. I have been given some 6m lengths of Beech in 50x100 size and need to resaw it to 50x10mm strips. Knights in Sydney will resaw it, but advise that the kerf will be 4mm. Must be a better way. Anyone know someone in the Sydney region that can resaw more econmomically?
-
4th March 2009, 03:11 PM #2
SENIOR MEMBER
- Join Date
- Feb 2004
- Location
- kuranda north qld
- Posts
- 0
with a well set up bandsaw you should be down to 2-3 mm kerf . try some of your local timber yards ,or boatbuilders , its not that hard to do , cheers bob
-
4th March 2009, 07:31 PM #3
Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 0
G'day and welcome Reliance.
Don't forget to fill us in on the results.
-
4th March 2009, 08:59 PM #4
A Spindle moulder with power feed and a thin kerf saw blade will eat that up. best part is you will get a ready to sand finish off the saw. No need to allow extra for thicknessing either. You just need to buzz and thickness the timber and buzz one edge and feed it through. A lot of shops will struggle with the six metres so if you can get away with shorter lengths it would be easier. We can do 6 metres but it involve moving machines
Ben
-
5th March 2009, 12:54 PM #5
New Member
- Join Date
- Mar 2009
- Location
- hill end
- Posts
- 2
Resawing with less waste
Thanks guys, probably the spindle moulder will be the best. I did'nt realise there was a powered version, sounds good. So I just take 10mm slices off the top of the plank, till we run out of thickness. Too Easy..
-
5th March 2009, 11:02 PM #6
Welcome and good luck with your project
Reality is no background music.
Cheers John