Results 1 to 10 of 10
  1. #1
    Join Date
    Apr 2008
    Location
    Lalla, Tasmania
    Posts
    0

    Default Beal Buffing kit

    In the Australian Woodsmith there is an article on buffing finishes and they mention the Beal Buffing Kit. Well I've been looking at a better system than my present method of a swansdown mop on a drill. Taking a leap of faith and watching their video, I purchased a new electric motor and ordered the Beal Buffing Kit. I have it all set up now and started on finishing one of my work pieces using the Beal buffing system. To say I'm happy with the results is an understatement, it's brilliant and does the job at least as well as I was hoping. You get three buffing wheels (8 inch) and a bar of each finishing compound required. Each wheel is labeled so you know what compound to use but what I really like is it is so simple to change each wheel with the arbour connection fitting. I will recommend this system and I 'm sure there are others that do a good job but my $340 investment will see me happy for some time.

    SB

    I have no relationship with Beal in the USA and I 'm only a subscriber to Australian Woodworker with no other relationship.
    Power corrupts, absolute power means we can run a hell of alot of power tools

  2. #2
    Join Date
    Jan 2010
    Location
    Melbourne
    Posts
    0

    Default

    I've read some good stuff on U.S. forums about this system. Did you buy it direct from the U.S.?
    -Scott

  3. #3
    Join Date
    Apr 2008
    Location
    Lalla, Tasmania
    Posts
    0

    Default

    Quote Originally Posted by Scott View Post
    I've read some good stuff on U.S. forums about this system. Did you buy it direct from the U.S.?
    Sure did Scott, cost me $139 all up but the kit is $71 and the rest is shipping. I think you could just order the arbour adaptor white diamond wax bar and then source the rest in Australia but I'm not sure you would save much in the end as we seem to pay big bucks for our buffing wheels here, and then you got to set it all up to fit. Go to their site at The Beal Tool Co and check out their video.

    SB
    Power corrupts, absolute power means we can run a hell of alot of power tools

  4. #4
    Join Date
    Jan 2010
    Location
    Melbourne
    Posts
    0

    Default

    Cheers, thank you.
    -Scott

  5. #5
    Join Date
    May 1999
    Location
    Grovedale, Victoria Australia
    Age
    66
    Posts
    2

    Default Beall Wood Buffing Kit

    Or you can buy locally here Beall Wood Buffing Kit
    Jim Carroll
    One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
    Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!

  6. #6
    Join Date
    Apr 2008
    Location
    Lalla, Tasmania
    Posts
    0

    Default

    Quote Originally Posted by Jim Carroll View Post
    Or you can buy locally here Beall Wood Buffing Kit
    Jim, thanks for that I feel really bad as I would have liked to buy it from you but the Australian Woodworker did not state a local supplier and when I did a google search only the US company was shown. Now I will get my Beal supplies from you. By the way if anyone plans the buy the kit make sure your electric motor is 1780 RPM maximum, mine is 1428 does very nicely.

    SB
    Power corrupts, absolute power means we can run a hell of alot of power tools

  7. #7
    Join Date
    Mar 2005
    Location
    Camden, NSW
    Age
    75
    Posts
    192

    Default

    Quote Originally Posted by Superbunny View Post
    ......
    By the way if anyone plans the buy the kit make sure your electric motor is 1780 RPM maximum, mine is 1428 does very nicely.

    SB
    Hi SB, 'normal' AC electric motors (ie not DC nor variable speed) run at fixed nominal speeds related to the number of magnetic 'poles' in the design. 2 pole motors run at nominally 3000rpm, 4 pole at 1500rpm (eg your 1428rpm), 6 pole at 1000rpm and so on. BUT, the US electricity supply is at 60Hz (= cycles per second) wheras most of the World is at 50Hz and so everything electric in USA goes 1.2 times faster! 1500 x 1.2 = 1800 (and hence their 1780rpm).
    As the next step would be to (our) 3000rpm, it is a good idea for everyone to stay with our 4 pole at 1500rpm and spend the extra bit of time enjoying the process!

    fletty
    a rock is an obsolete tool ......... until you don’t have a hammer!

  8. #8
    Join Date
    Apr 2008
    Location
    Lalla, Tasmania
    Posts
    0

    Default

    Quote Originally Posted by fletty View Post
    Hi SB, 'normal' AC electric motors (ie not DC nor variable speed) run at fixed nominal speeds related to the number of magnetic 'poles' in the design. 2 pole motors run at nominally 3000rpm, 4 pole at 1500rpm (eg your 1428rpm), 6 pole at 1000rpm and so on. BUT, the US electricity supply is at 60Hz (= cycles per second) wheras most of the World is at 50Hz and so everything electric in USA goes 1.2 times faster! 1500 x 1.2 = 1800 (and hence their 1780rpm).
    As the next step would be to (our) 3000rpm, it is a good idea for everyone to stay with our 4 pole at 1500rpm and spend the extra bit of time enjoying the process!

    fletty
    I agree, and from my observations buffing French polish if the buffer went too fast it would be easy to melt it, I know I did it twice. Anyhow, on eBay, 1400rpm were available here in Australia where I got mine.

    SB
    Power corrupts, absolute power means we can run a hell of alot of power tools

  9. #9
    Join Date
    May 2011
    Location
    Murray Bridge SA
    Posts
    293

    Default

    I've got the lathe mounted 3 in 1 and find it is great. Now that I know Jim has the product I'll get the consumables from him.
    Kryn

  10. #10
    Join Date
    Jun 2013
    Location
    australia
    Posts
    2

    Default

    Quote Originally Posted by Jim Carroll View Post
    Or you can buy locally here Beall Wood Buffing Kit

    will be up your way in a few months will have to stop in and have a look

Similar Threads

  1. Buffing Organoil
    By Scott Taylor in forum FINISHING
    Replies: 3
    Last Post: 30th March 2011, 06:49 PM
  2. Question about Buffing Oil
    By hsc07ww in forum FINISHING
    Replies: 0
    Last Post: 24th June 2007, 04:12 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •