![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
Thread: Sicar Spindle Moulder
-
27th February 2014, 08:20 PM #1
Senior Member
- Join Date
- Jul 2008
- Location
- Melbourne
- Age
- 49
- Posts
- 109
Sicar Spindle Moulder
Hi,
I know most of the machines in this thread are a lot older but I thought is was my best bet.
I have just purchased a Sicar S1000M spindle moulder. It appears to have been made in 1987 according to the stamp on the plate on the back of the machine.
I was wondering, on the off chance, if someone may know where I could get a manual for it. Being that the machine is not that old, I figured it should be a lot easier than my other machines.
I have to replace the bearings and thought a manual may make it a bit easier.
Does Sicar have anything to do with SCM?? My searching on the net shows some similarity.
I have tried Gabbett Machinery but they were not helpful.. as usual.
Many thanks, Andrew.
-
28th February 2014, 11:46 AM #2
SENIOR MEMBER
- Join Date
- Jul 2003
- Location
- Melbourne
- Age
- 53
- Posts
- 536
Might be worth shooting them an email and seeing if they can Email you a PDF or something: http://www.sicar.it/sic/
-
10th March 2014, 10:50 PM #3
New Member
- Join Date
- Mar 2014
- Location
- Germany
- Posts
- 1
Greetings from Germany
Hi Andrew, I could send a PDF file in German if you like. As I am informed, Sicar closed in May 2013.
Kind regards djns
-
11th March 2014, 09:26 PM #4
Senior Member
- Join Date
- Jul 2008
- Location
- Melbourne
- Age
- 49
- Posts
- 109
That would be great thanks. Any information would be greatly appreciated. I forgot about this thread. Have been so busy with work, I have not had a chance to look at it any further. I'll pm my email if that helps.