Results 1 to 5 of 5
  1. #1
    Join Date
    Dec 2007
    Location
    Sydney
    Posts
    99

    Default Where to buy 70mm long screws

    I’m finally finishing some chairs and need 70 mm screws to hold the seat to the frame.
    On the originals I’d used 10gauge 3” and ground them a bit shorter.
    Ive used 65mm square drive to get them together but they are stripping out on fully tightening.
    I have 75mm bit would prefer not to grind these down as they don’t screw in as well as correct length ones.
    On the original I also glued the seats on but having to do repairs 38 years later haven’t this time so that any repairs will be easier.
    I’ve also modified the front rail to fully support the seat so repairs shouldn’t be needed
    H.
    Jimcracks for the rich and/or wealthy. (aka GKB '88)

  2. #2
    Join Date
    Jun 2013
    Location
    Geelong
    Posts
    87

    Default

    Scrooz is a forum sponsor they have quite a few lengths, I just looked under gold screws as I have no idea what you need exactly, but the ones I saw I have removed from chairs so they should do your job,
    cheers

  3. #3
    Join Date
    Sep 2008
    Location
    Petone, NZ
    Age
    68
    Posts
    27

    Default

    I have traditional 3 1/2" x 10g steel slotted CSK screws available - but if you don't want to grind them....

    Cheers, Vann.
    Gatherer of rusty planes tools...
    Proud member of the Wadkin Blockhead Club .

  4. #4
    Join Date
    Jan 2014
    Location
    Sydney Upper North Shore
    Posts
    710

  5. #5
    Join Date
    Aug 2008
    Location
    Melbourne
    Age
    34
    Posts
    108

    Default

    Bit late, but the answer to pretty much any "Where do I get <cabinetry related item>" is Hafele.

Similar Threads

  1. Replies: 3
    Last Post: 1st April 2008, 12:24 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •