Cubism Competition 2022 - Dutch

[Dutch]

Just a newby, from the other side of the world. Not sure how this works, but it's small enough, so I thought, let's share it... So not in it to win it, but...
I got myself a desktop CNC (SainSmart 3018 ProVER)and my with 3 plastic tubes. I married them together..
I designed it in Fusion 360 and used 3mm ply and a 0.8mm drill.
Dimensions are 179 mm high, 162 mm wide, 46 mm deep

IMG_20220304_160451.jpg

My 3018 PROVer - Tube rack

Since then I made a similar one with the laser, but that may be a different story...
My 3018 PROVer - Things

[BobL]

Hi Dutch,

The cubism competition is not one where you can just submit a piece of already completed work.
The competition is based on the "voyage", so the entrant has to detail the construction via a series of posts with photos, showing and detailing eg stock used, tools/machines used, ongoing progress, problems, etc thru to the to final product. Even if you have the photos and can tell the story they cannot be from the past. You have to announce your entry into the comp and then start the series of posts.

However, you are certainly welcome to make another one and post the progress as required by the competition.