Results 1 to 10 of 10
Thread: old to look new again
-
6th January 2012, 11:11 AM #1Novice
- Join Date
- Mar 2007
- Location
- mount isa
- Posts
- 9
old to look new again
hell all, I,am doing up this old table, for a guy, and he want,s it sanded RIGHT BACK, he want,s it to look new, again, but I told him ,it,s in the timber, But he does not understand, what I ,am telling him, have tried, paint stripper, steel wool, sand paper, and more paint stripper, steel wool, and sand paper, any HELP, on the BEST way to do this , thank you
-
6th January 2012, 11:22 AM #2Novice
- Join Date
- Mar 2007
- Location
- mount isa
- Posts
- 9
Sorry I did not add the pictures, thank you
And I don,t know what type of timber it is thank you
-
7th January 2012, 12:12 PM #3
Can't help much I'm afraid, if you have tried those things then I dont't know what would work some of the other guys on the forum may be more helpful.
Reality is no background music.
Cheers John
-
7th January 2012, 01:34 PM #4
By the time you sand out the residue, there'll be precious little of the detail/table remaining.
.
I know you believe you understand what you think I wrote, but I'm not sure you realize that what you just read is not what I meant.
Regards, Woodwould.
-
7th January 2012, 01:41 PM #5
Tell him to buy a new table.
The charm of this particular table lies in the patina and detail. Sanding removes both. There are many that would pay a lot more for the patina than for the design alone. Stop before it is completely gone. Educate your guy.
Regards from Perth
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
7th January 2012, 02:27 PM #6
ask him how good will he look with a facelift? They can't make him 20 years old again. Same goes with the table, there will still be wrinkles and dints but it could look better, but it will not look new.
-
7th January 2012, 07:10 PM #7regards from Alberta, Canada
ian
-
16th January 2012, 01:13 AM #8
I agree that the patina is what makes the piece and would try to convince him it's all part of the pieces history and interest.
But...
... if he insists, have you thought about bleaching the wood to even out the colour of the old stain residue. Then staining it something appropriate to act as a base for the finish.Dragonfly
No-one suspects the dragonfly!
-
17th January 2012, 08:00 AM #9New Member
- Join Date
- May 2008
- Location
- Hampton. Qld
- Posts
- 2
Table redo
I think it is old old pine. Bleaching is the way to go to get it looking the same.
-
17th January 2012, 07:22 PM #10
Strange that some people want to make old furniture look like new when many furniture makers try to make their new furniture look old.
Reality is no background music.
Cheers John
Bookmarks