![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: Alloy Live Bait Tank Build
-
7th May 2024, 04:05 AM #1
Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,458
Alloy Live Bait Tank Build
This is well over kill 2.5mm aluminium it's a bait tank for my boat, kind of a dicky location and shape but it allows me to run a hose straight up the back to feed water and i will drill holes thru the back of the tank for over flow, it will also have a lid and a small led light for night fishing
I will weld on some brackets to secure it once i weld it up, in no rush to finish it but if there is low wind tomorrow i might weld it up will be using the EWM mig won't be tig welding it due to this sheet of aluminium sitting out in the weather for 4+ years i will still prep it before welding, inside welded sections will get sikaflex if it leaks
Attached Images
-
20240506_152858.jpg (229.9 KB)
Read the full thread at metalworkforums.com...