Results 1 to 8 of 8
  1. #1
    Join Date
    Nov 2012
    Location
    Newcastle
    Posts
    0

    Default Howdy from Newcastle NSW

    Hello all, im fairly new to this whole wood working caper but as a rod builder have dabbled in turning reel seats, cork and such.

    I have finally bit the bullet and baught a cheapo lathe, its cheap but alot better than an inverted drill press. Its not what i wanted but am cash restricted at the moment.

    I hope to learn alot here and rack a few of your brains for information. I pick the lathe up on monday and have already ordered some small blanks and well, cutlery to apease the wife. I thaught smaller easier things like that and repeditive use should hone my skill

    Thanks

    Dean.

  2. #2
    Join Date
    Jan 2007
    Location
    Katoomba NSW
    Posts
    332

    Default

    Welcome Pilchard,
    make sure you show us pics of the cutlery when you're done.
    You have to apease US as well as the wife now.
    Those were the droids I was looking for.
    https://autoblastgates.com.au

  3. #3
    Join Date
    Nov 2012
    Location
    Newcastle
    Posts
    0

    Default

    would prefer to show you reel seat hardware and inserts.

    Im thinking lessons would be good, just to make sure i dont hurt myself. So if there is anyone near Charlestown in Newcastle that would like to spare an hour or two to show a new chum the ropes so to speak, id be apreciative. I reckon i have a basic understanding but would like some proper detailed one on one.

    Im a member of a few hobby forums but damn this is a big one, the sheer volume of posts is astounding, it will take me a year to read through them all, and then another year to analise and absorbe some of it. Termanology is there a wiki??

    cheers

  4. #4
    Join Date
    Jun 2007
    Location
    North Of The Boarder
    Age
    68
    Posts
    0

    Default

    If you want to see some good demonstrations on turning this weekend head down to Windsor Trend Timbers either tomorrow or Saturday.

    Local Turners groups may also be a good source.

  5. #5
    Join Date
    Jan 2007
    Location
    Katoomba NSW
    Posts
    332

    Default

    A good source of info/lessons would be
    Woodturners of the Hunter: Woodturners of the Hunter
    Those were the droids I was looking for.
    https://autoblastgates.com.au

  6. #6
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    2,576

    Default

    G'Day & Welcome "Dean",
    You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
    Make sure you show off your handiwork as everyone loves a photo, especially WIP photos with build notes.
    Enjoy the forum.
    Enjoy your woodwork.
    Cheers crowie

    PS - Watch for garage sales & farm clearance sales for good used tolls/machinery to help the budget stretch further...

  7. #7
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    2,966

    Default

    Welcome to the forum and you are correct this is a big site. I have been a member for a few years now still not read everything.

    Do not hesitate to post questions in the wood turning sub forum if you get stuck on something.

    WOODTURNING - GENERAL

  8. #8
    Join Date
    May 2011
    Location
    FRANCE
    Age
    59
    Posts
    1,889

    Default

    Welcome Pilchard,

Similar Threads

  1. Howdy
    By triw51 in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 2
    Last Post: 26th January 2012, 08:34 PM
  2. Howdy All
    By jynks in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 6
    Last Post: 10th August 2010, 09:55 PM
  3. Howdy All
    By scrollsawwoodar in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 5
    Last Post: 30th January 2009, 09:05 PM
  4. Howdy
    By Strydr in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 7
    Last Post: 5th December 2008, 12:48 PM
  5. Howdy! From QBN NSW
    By badgaz in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 3
    Last Post: 23rd October 2008, 10:00 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •