![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 3 of 3
Thread: Flashing question Kingklip700
-
24th October 2007, 11:33 PM #1
Flashing question Kingklip700
I have to flash a new roof of Kingklip700. The longitudinal flashings are recommended to be minimum overlap of 2/3 of a pan width (from the wall into the pan). This gives coverage of one rib and 2/3 of one pan. Has anyone flashed over 2 ribs or is this overkill? I have tried to show this in the attached photo. Any recommendations?
-
25th October 2007, 06:57 AM #2
Novice
- Join Date
- Jul 2007
- Location
- Fraser Coast
- Posts
- 22
I flash over the second rib. You can,t have too much protection. It would also allow you to fasten the flashing into the top of the second rib, otherwise you have no way of screwing it down.
-
25th October 2007, 01:51 PM #3
Intermediate Member
- Join Date
- Nov 2006
- Location
- Brisbane
- Posts
- 22
Similar Threads
-
Waterproofing deck - flashing
By nobloodyidea in forum DECKINGReplies: 0Last Post: 10th October 2007, 11:43 PM -
Rebuilding the workshop: flashing question
By rsser in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 2Last Post: 11th January 2007, 05:23 PM -
Two-part Question
By Rodgera in forum JOKESReplies: 1Last Post: 12th May 2006, 07:17 PM -
Bath/Shower Wall Lining Question
By JamesD in forum BATHROOM & TOILETReplies: 16Last Post: 26th April 2005, 06:31 PM