Results 1 to 3 of 3
  1. #1
    Join Date
    Mar 2008
    Location
    sydney
    Posts
    5

    Default Parker Chair Loose Seat

    Hi Folks

    I've got some nice old Parker chairs, the type with curve back and curved seat.

    Some of the curved seat parts are loose, because the beautiful old long steel screws have pulled out of the plywood seat bottom, and because the design allows a lot of leverage on the seat edges.

    I'd like to fix them, but I'm not sure how to go about it. Someone suggested Araldite in the holes then screw into the wet glue. Another suggestion was to make some timber plugs and install them to screw into, but they may be a little beyond my skill set!

    Any advice is most appreciated!

    thanks, Toby

  2. #2
    Join Date
    Aug 2011
    Location
    bilpin
    Posts
    510

    Default

    Fill the holes with Plastibond, spray the screws with Pure and Simple cooking oil, reinsert screw while the plastibond is still wet, clean up any excess Plastibond from surrounding surfaces, allow to dry. The Pure and Simple acts as a release agent between the screw and the Plasibond, allowing the screws to be removed and inserted as per normal once the Plastibond has set.

  3. #3
    Join Date
    Mar 2008
    Location
    sydney
    Posts
    5

    Default

    Excellent. That sounds like a plan. Thanks.

Similar Threads

  1. How to regrind worn tap seat + How to properly install a new seat insert
    By ubeaut in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 0
    Last Post: 16th November 2008, 07:10 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •