Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
4th November 2021, 10:40 AM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,458
Welding table etc any interest. Sydney
I’ve had a rather disturbing visit from our local council compliance commissar.
As my non conforming permitted use is ‘woodworking’ I may be selling off a couple of items wot aren’t woodworking and aren’t strictly needed.
About 10 years ago I brought home from the structures’ lab an old rig.
It’s a 12mm steel plate 3.2 m x 1.2m welded to two longitudinal 200mm x 100mm x 5mm sections the full length.
This sits on a couple of cast iron machine base sections giving a deck height of 770mm.
Theres a few tapped holes in the top but it’s pretty clean and rust free.
I used it with 5 50 x 50 fabricated frames to cut and repair a car chassis.
The other is a 45” x 55” cast iron printers stone.
Sits on original wooden base, all the drawers of type traded for lifting onto my ute 25 years ago.
Ive used this as a marking off table. (Patternmaking).
There might be about a 1mm sag across it, I can check when it’s decluttered with my 1m straight edge and feelers.
Probably a large angle plate with it.
This is just a heads up to see if there is any interest out there.
Can post pics or Inspection ok if there is.
H.
Read the full thread at metalworkforums.com...
Similar Threads
-
RBA raises interest rates! But we have SIX MONTHS INTEREST FREE.
By nt900 in forum IDEAL TOOLS - High end tools for all woodworkers.Replies: 0Last Post: 3rd March 2010, 06:08 PM