Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5

Thread: water hammer

  1. #1
    Join Date
    Jan 2005
    Location
    Brisbane
    Age
    52
    Posts
    0

    Default water hammer

    Hey everyone,

    just in the final stages of the bathroom renovations and we are now fitting our new fittings.

    As soon as the water came back on we notice shocking, machine gun type water hammer coming from the hot water tap in the shower....you have to hit the cold water in the shower to stop it....

    It then cause water hammer else where in the house until it bleeds out.

    The only real plumbing chang we have made is to install the new fittings which are all ceramic discs.

    The other minor flaw is that we have an apprentice plumber doing the work, a good kid but he hasn't any experience with water hammer.....

    Anyone have any experience with this...any relationship with the ceramic discs....

    By the way the other symptom is that the shower and bath tap are dripping which I thought would happen with ceramic dics?

  2. #2
    Join Date
    Jul 2005
    Location
    Melbourne
    Posts
    26

  3. #3
    Join Date
    Jan 2005
    Location
    Brisbane
    Age
    52
    Posts
    0

    Default

    It turns out that the installation of the ceramic disc taps was the cause of the problem.

    It was interesting that the plumber wanted to go for the ater hammer arrester straight away...I was sitting there saying hangon...the taps are leaking....fix the cause not the symptom.

    So I did further research and was told that this is a common problem with ceramic taps, they need to be installed properly, and even experience plumbers make mistakes with them.

    Essentially, what the plumber did was install them like regular taps....

    What he should have done was....

    1. Turn water off.
    2. Separate the outer locking nut from the tap spindle, it now looks different to a regular tap.
    3. insert the spindle.
    4. Turn the water back on.
    5. It will probably be leaking...so adjust the spindle until it stops.
    6. Put on locking nut.
    7. Put on handle etc.

    As soon as I told him this...it worked...no more drips, no more water hammer.

  4. #4
    Join Date
    Jan 2004
    Location
    South of Adelaide
    Posts
    136

    Default

    Can I ask why on earth you chose ceramic disc taps in the first place?
    Jack

  5. #5
    Join Date
    Jan 2005
    Location
    Brisbane
    Age
    52
    Posts
    0

    Default

    Essentially I went to about five different bathroom suppliers and asked for their recommendations regarding tapware and accessories, I also spoke to a number of people who have bathroom renovations recently. The vast majority of the people I spoke to recommended ceramic disc taps.

    Additionally, most of the higher end taps come standard as ceramic disc. Now theat they have been correctly installed, they more than meet my expectations. They don't leak despite the poor condition of the seats in the old plumbing in my house....

Similar Threads

  1. Jacaranda gunk in water tanks.
    By JDarvall in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 10
    Last Post: 22nd September 2005, 11:04 PM
  2. Gas hot water heaters
    By Bob Willson in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 28
    Last Post: 29th March 2005, 12:16 PM
  3. Water Crisis!!
    By Tikki in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 18
    Last Post: 19th November 2004, 03:51 PM
  4. bad water
    By capedcrusader in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 9
    Last Post: 24th July 2004, 09:11 AM
  5. changing tap washers on hot water taps
    By jackiew in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 85
    Last Post: 6th May 2004, 06:43 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •