![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 6 of 6
Thread: Congratulations zymurgy
-
6th March 2004, 06:25 PM #1
Congratulations zymurgy
I think congratulations are in order for Gordon (zymurgy) for having his excellent dining table and chairs shown in the latest issue (#42) of Australian Wood Review (p48). For those not familiar with the project there are photographs here. Gordon you should feel extremely proud that your work is seen in such a high caliber as some of the others in the competition. It is also pleasing to read through the magazine and see contributions from members of this board.
Well done.
Stinky.Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.
-
6th March 2004, 07:25 PM #2
Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 4,816
Well done Gordon.
Allan
-
7th March 2004, 10:46 AM #3
Great stuff, Gordon.
I was very impressed when I opened the mag this week and saw your table and chairs in all their glory. Congratulations.
Col
-
7th March 2004, 03:18 PM #4
Gordon,
A very elegant dining set!
I wonder what method you used to cut the 144 mortices in the set of chairs? It struck me that my morticing jig, see
http://www.woodworkforums.ubeaut.com...=mortising+jig
would have made short work of them.
Rocker
-
7th March 2004, 09:38 PM #5
I must buy the magazine, as I haven't viewed it yet!
I used the tablesaw for tenons and a forstner bit and a chisel for mortices.
Gordon.
-
7th March 2004, 09:49 PM #6
Now I am REALLY impressed; musta taken you an hour or two
Rocker