![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 3 of 3
Thread: Cleaning timber
-
30th October 2011, 10:29 AM #1
Senior Member
- Join Date
- May 2010
- Location
- melbourne
- Posts
- 7
Cleaning timber
As can be seen by my other postings on this BB I am in the process of restoring a Clinker Speed boat.
I have been using "Coopers" paint stripper to remove the paint and varnish from the inside f the boat. I have used about 3 liters so far and have done about55 60% of the inside of the boat.
I want to get the inside really clean and have found that the flushing solution gets rid og a lot of the dirt.
I am wondering what the thoughts are of using a timber cleaning product like Cabots Deck Clean to really get the interior clean. I am proposing to mix up the solution iaw instructions, pray the solution on using a pressure garden sprayer, scrub with a stiff dust pan broom and then flush everything away with the Karcher.
What is the general thoughts on this idea?
Peter Sneddon
-
1st November 2011, 07:47 AM #2
Senior Member
- Join Date
- May 2010
- Location
- melbourne
- Posts
- 7
Cleaning timber
Has anyone any thoughts on my proposal?
-
10th November 2011, 01:34 PM #3
Senior Member
- Join Date
- Mar 2009
- Location
- Hobart
- Posts
- 410
Hi Piquet, from my basic understanding of such matters, that sounds like a reasonable approach to me. I do know from others in the past, that the use of oxalic acid can be a good method of neutralising any remaining effects from paint strippers, though I have never tried it myself.
Normally, my approach when cleaning up after paint stripping, and I havn't worked on a wooden boat but rather painted joinery or antiques, is to simply use metho and coarse steel wool, and in some instances re-go over the surface with warm water and a mild soap/detergent to wash any residual muck away. However, such an approach I doubt would be practical in your instance.
So if it were me working on a similar project as you are, I think I too would probably do as you suggest. The Karcher shouldn't be a problem given we are talking about a boat than an antique.
Perhaps other's more experienced might have suggestions. Or alternatively I suppose you could always discuss your ideas with a boat yard/ship chandlers ???
Similar Threads
-
Cleaning timber
By piquet in forum RESTORATIONReplies: 0Last Post: 30th October 2011, 10:28 AM