![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
-
25th February 2013, 02:00 AM #1
Problem taking off old 70s aluminium sliding door for wheel replacement
Hi Guys
I'm a bit stuck as to how to take the sliding door off to get to the bottom wheels which are shot. I thought the door was held captive by the riveted bottom track. But now that I've drilled it out and removed it, it seems the door is still kept captive by a protruding locator along the bottom edge (one piece with door from what I can see).
Here's a pic of the bottom rail I drilled out
and the locator at bottom of door still holding it captive
not sure if the top track has to be drilled out to get the door out?
Thanks for any insight
Attached Thumbnails
Read and reply to the full thread at RenovateForum.com....
Similar Threads
-
Sealing around sliding door frame
By Reno RSS Feed in forum GENERAL ODDS N SODSReplies: 0Last Post: 29th January 2013, 12:20 AM -
Door panel replacement
By BronzePhoenix in forum RESTORATIONReplies: 3Last Post: 7th December 2012, 04:14 AM