Results 1 to 7 of 7
  1. #1
    Join Date
    Jun 2013
    Location
    Central Ontario
    Posts
    1

    Smile Hey There. Newbie from Canada

    My name is Dave and I live in East Oro, Ontario, Canada.
    I have been reading up on dust Collectors and overarm blade guards since I took off about 19 mm of my left thumb three weeks ago on my tablesaw.
    I joined your forum for the read of the generic 2hp dust collector to be able to see the diagrams and pics.
    I must say it is taking me a bit to get around the lingo, but I am fascinated by the wealth of info available here.
    I'm looking forward to learning much and broadening my horizons.

  2. #2
    Join Date
    Feb 2009
    Location
    Sussex Inlet NSW
    Posts
    45

    Default

    G'day Dave
    Welcome to the forum
    Just a little late for guard on saw ......19mm late
    Heaps of info on the forum.
    If you cant find what your after just post a question
    I'm sure you'll get answers
    Again Welcome

    Brian

  3. #3
    Join Date
    Jan 2011
    Location
    Ormeau, Gold Coast, Australia
    Posts
    203

    Default

    Welcome aboard Dave, hope you enjoy the journey (and your thumb recovers).
    Regards Rumnut.

    SimplyWoodwork
    Qld. Australia.

  4. #4
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    2,576

    Default

    G'Day & Welcome "to the Great South Land" & to a top forum "Dave".
    We have quite a few "canucks" on the forum; all trying to escape the cold..lol...
    [There are quite a few good articles on Dust Collectors especially by "BobL"]
    You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
    Make sure you show off your handiwork as everyone loves a photo, especially WIP photos with build notes.
    Enjoy the forum.
    Enjoy your woodwork.
    Cheers from On Top DownUnder, crowie

    PS - Sorry to hear of your accident with the thumb......hoping the healing process goes well....

  5. #5
    Join Date
    May 2011
    Location
    FRANCE
    Age
    59
    Posts
    1,889

    Default

    welcome aboard

  6. #6
    Join Date
    Oct 2006
    Location
    Townsville, Tropical North Qld.
    Age
    76
    Posts
    1

    Default Welcome

    Hi Dave, welcome to the forums. Hope you enjoy them as much as I do. Heaps of great info here and some special WIP's to drool over. Don't worry about our slang, it's not that we want to confuse you, just the way it is. If you want a translation just ask, we are just the same in your world. When I was in Alberta over Xmas I found a lot of language variations that I had to ask about and I'm not talking about french either.

    Cheers, from Oz. Ian

    PS. sorry to hear about the thumb, hope it's healing up OK. Check this out, not cheap but I find it an excellent safety device, the 4" dust port was what triggered my initial interest. Cheers, Ian
    "The common law of business balance prohibits paying a little and getting a lot.. it can't be done.
    If you deal with the lowest bidder it is well to add something for the risk you run.
    And if you do that, you will have enough to pay for something better"

  7. #7
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    2,966

    Default

    Welcome to the forum. I hope things are better regarding your thumb.

Similar Threads

  1. Hello from Canada
    By northwood in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 11
    Last Post: 9th January 2010, 02:38 PM
  2. Hi from Canada
    By phelpsr in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 8
    Last Post: 26th November 2008, 11:42 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •