Page 1 of 2 12 LastLast
Results 1 to 15 of 20
  1. #1
    Join Date
    Feb 2008
    Location
    sydney
    Posts
    33

    Default Finishing a restored 60yo timber floor

    Hi Everyone

    I've just joined woodworkforums, better late than never! What a great site. I've just read the threads 'Restore Old Floor Boards - with a twist...' and 'A recipe for filler - Blackbutt flooring'

    I'm really impressed with everyone's contribution.

    I've just about finished my floor/subfloor restoration (4 rooms and hallway) and have to consider the finish. I now have a mixture of new cypress (one room and hallway), original old cypress that is just about ok (one room), original old oregon (I think) that was also just about ok (one room), and finally one room that did have yellow tongue due to previous termite damage that now has old cypress,
    recycled from the area that I laid the new cypress.

    3 Questions:

    (1) I've used a Paslode gun and mistakenly started with C50 nails before moving to ND65's and then settling on ND50's. The new cypress flooring is a bit creaky tho, have I cramped up over zealously or is this a nailing problem? Can I or should I do anything about it at this stage? The timber was laid loose for a month before nailing

    (2) I have gaps of up to 2mm in the 'just about ok areas' that need dealing with after (or during) sanding. I would prefer to use something non toxic. Can anyone go a bit further than the advice in the thread: 'A recipe for filler - Blackbutt flooring'

    (3) I like the look of Livos Ardvos as a finish, but it's not locally sourced (and only $250 odd in the US). Any ideas here? I wouldn't mind something that needs regular maintenance (polishing for example) as long as it's reasonably trafficable, again non toxic, and can take spillages.

  2. #2
    Join Date
    Oct 2007
    Location
    Saratoga, NSW
    Posts
    96

    Default

    Hey bnpenty,

    Sounds like you have done a lot of work already! in response to your point 2,

    With an old floor like yours I wouldn't be to worried about gaps of 2mm... basic problem with filling gaps like this is flexible sealer will suck down or raise if the boards contract or expand at all and this can be a disaster for your finnish... Harder fillers are likely to crack or come unstuck if the boards move at all - again stuffing your finnish... our floor has lots of gaps between 1 and 3mm its just the way it is - remember its an old floor and as such it has an old floor character to it... and your original areas are twice as old as mine... I had 1 gap of 4-5mm which i filled by cutting a fillet of timber and glueing in with selleys aquadhere, it came up tops its virtually an invisible repair - can tak a pic if you wish... if you have better tools and skill than me you could probably do this for 3mm gaps... I cut the top and bottom of the groove off a board and filled my gap with 4 individual lengths - as i only had a circular saw to work with thats not mounted under a bench or antyhing...

    I know nothing of livos ardvos finnish, all i can tell you is we're super happy with the bona product we used, was easy to apply - and by all accounts will be hard wearing.. they have other options for the appearance of finnish - ours is their most matt finnish that is supposed to be the most natural look for the timber...

    Keep us updated, and find a camera to take plenty of pics! i miss my floor project already...

  3. #3
    Join Date
    Feb 2008
    Location
    sydney
    Posts
    33

    Default

    Thanks for your reply Callum, The new cypress was to replace old cypress that was so poor that gaps up to 6mm were the least of the defects (inc bog, chunks missing, stains, borer damage and more). I wanted to use recycled cypress but baulked at paying $60 p.sq.m, when new was $30. So I didn't have to do what you did in repairs. I looked at Bona's website but they don't explain what's in their product other than to say it's water based.

    I've got a french polisher coming round and I'm not yet sure what I should be asking him. I like the sound of some trowling over the defects method tho, using sawdust?

    re the creaky boards, what does anyone think about using long 6's through knots over joists.

    I still have little idea what finish I want to use 'cept I don't want to use polyurethene

    Nick

  4. #4
    Join Date
    Oct 2007
    Location
    Saratoga, NSW
    Posts
    96

    Default

    $60 bucks a sqm is rather pricey... i got my recycled for $12 sqm, i bought 20% extra as wastage because i knew there would be more wastage than new boards... and then i had to de nail it as well but at 1.20 per lm it was a small price to pay!

    I put some plastic wedges between joist and boards on a couple of creeky ones i had, and then renailed the boards from the top as well - worked well so far... I also had a couple of ends that were only just on joists with no nails in the ends and I didn't want to nail to close to the end so I sistered up partial joists to the original ones to get around this - ment i could then nail the board 3 or 4 cm from their ends... I still have 1 creeky area i might try to get some wedges into, i didnt realise it was creaking until a bit late in the piece...

  5. #5
    Join Date
    Feb 2008
    Location
    sydney
    Posts
    33

    Default

    Just joking, but if you're planning on coming to Sydney Call, I'd buy up all that cypress at $12, flog it here for $50, and have a holiday in Nepal on the proceeds. You got an amazing bargain.

    Re the nailing I guess I was hoping someone was going to tell me to get a nailing gun that takes "T" nails which are chunkier than the ND50's but not designed for my gun. Wedges: I really don't want to go under the floor any more! I probably will have to for something else tho so maybe I should get some wedges ready.

    Today I'm punching in nails, and doing all the masonry work. Any tips here re punching in nails on the old flooring so I dont end up with huge punch holes? or should I sand a bit first to see where it's nec. Masonry: I'm really dreading this and I'm going to have to suit up. I have to chase up the wall a bit as I've done some subfloor wiring, cut holes for the backing boxes, and put in some wedges to nail the skirting in later. Yuk, one of the reasons I stopped working as a chippie full time was I got sick of getting brick dust out of my hair, off my teeth, and out of my nose. Pray it doesn't get hot today when I'm in the suit and masked up.

  6. #6
    Join Date
    Oct 2007
    Location
    Saratoga, NSW
    Posts
    96

    Default

    I've got no suggestions with the punching, we sanded our floor with 40 grit before punching that was mainly because there was still alot of crud on the floors from under the tiles and I couldn't see where 80% of the nails were... our original floor has T nails but I just punched them with a round punch and filled em with timbermate putty... sorry i couldn't be more help there...

    Definitely got a deal on the recycled boards, i'll be remembering that demo yard for all future projects!

  7. #7
    Join Date
    Feb 2008
    Location
    sydney
    Posts
    33

    Default Some questions remain....

    Hi Callum, thanks for your reply, I guess I still have a few unanswered questions. Will anyone else lob their two bobs worth in....I did about half the masonry work today and then my grinder started to play up. Will work on it tommorrow with a mate but then normal day job til Fri. I cleared everything out of the 4 rooms to be sanded but got stood up today by French polisher. Will try to get another quick. Still hoping to sand next w/e and I'm now thinking of using Tung Oil, although the idea of using something that needs polishing regularly does have appeal! Nick

    Edit: Can you give me the name/no./website of that demo yard

  8. #8
    Join Date
    Oct 2007
    Location
    Saratoga, NSW
    Posts
    96

    Default

    PM'd ya the details

  9. #9
    Join Date
    Mar 2008
    Location
    Sydney
    Posts
    14

    Default

    ?
    Last edited by falc72; 7th March 2008 at 10:57 PM. Reason: repeated message

  10. #10
    Join Date
    Mar 2008
    Location
    Sydney
    Posts
    14

    Default

    Hi Bnpenty,
    I just finished a hardwood floor about 50 years old and punching nails was a hard very hard job. There was no way around using a punch that left a bigger hole than the nail, unless the nail head was already concealed or level with the timber. The reason is the punch just slides off the nail head if it is standing proud and then makes a bigger hole. So make sure you hammer the nail head flush and then try with a small punch. If that doesn't work use a flooring punch with a cupped head so it encloses the nail head (won't slip off). Don't be too scared to leave a bigger hole as it will be filled up anyway. I was punching hardwood and I tell you it was fun NOT!!!!!. It would sometimes take three of four sometimes five heavy hits with a lump hammer and flooring punch just to sit the nail under the timber. Gave me new respect for Australian hardwood. I'd punch all nails on all joists before and as you progress.
    Cheers.

  11. #11
    Join Date
    Feb 2008
    Location
    sydney
    Posts
    33

    Default More concerns !?!?!

    Yeah, you poor bugger, I can imagine. I'm not too bad on that on as I've got either baltic pine, cypress or hoop pine depending on who you talk to and none of them are too hard. I do have a cup punch and it's working fine. I'm sanding this w/e (see other post about sanding dramas) but I've run out of time to finish the chasing for power sockets. I'm worried about grinding (with boots) fine dust into my sanded floor if I do it after, and likewise with finished floor if I do it later, any ideas?

    Also I have one room, maybe hoop pine, where as I punched the nails in I could see the rust discolouration around the nail head seemed to go right down into the wood. Aside from excessive sanding, is there anything to be done here? I think I'm gonna do my next floor in secret nailed hardwood.

  12. #12
    Join Date
    Mar 2008
    Location
    Sydney
    Posts
    14

    Default

    Yep it's a catch 22 sometimes which job to start first. I'm now replacing skirting and I've got spac filler dust all over my new floor. but can't be helped. I think with the rust you'll just have to realize that the floor won't ever be perfect. Mine's got stains, gaps, nail holes and low boards all through it. You just can't sand it until it is all level and stain free. Mind you I didn't sand and finish mine, but I'm glad because I might have been mistaken into sanding until I had them all level and god only knows how much timber would have been left after I finished. Maybe cover your floor if you need to work with some old sheets.
    I'm hoping to attach a pic of a part of my floor. Anyone hazard a guess as to what type of timber it is?
    Cheers.

  13. #13
    Join Date
    Feb 2008
    Location
    sydney
    Posts
    33

    Default

    You really can't tell from that photo, post a close up shot. I took a sample to Ironwood in Rozelle, Sydney, they sold me some hoop pine to patch, only 2 lineal metres thank god 'cos it was $24/l.m. It's a pretty good match but I'm not sure... Nick

  14. #14
    Join Date
    Mar 2008
    Location
    Sydney
    Posts
    14

    Default

    I forgot to take a sample with me when I needed a few more pieces. I went to the shop at Rockdale and the closest I could guess was Tallow, but after the polishing I suspect that it isn't. Anyway, we can't have perfection all the time. Here's some closer pics.
    Cheers.

  15. #15
    Join Date
    Dec 2003
    Location
    Frankston-Langwarrin VIC
    Age
    61
    Posts
    280

    Default

    It looks to be some sort of Ash. Mountain Ash, Vic Ash, Alpine Ash, Cigarette Ash.

    From the pics the boards seem to of copped a bit of a bollocking stain wise, making it tricky to give a 100% call on the timber type.

    Some might just call it Tasmanian Oak. Guess it doesn't matter too much what we call it, as you seem happy enough with the results and that's the main thing.

Similar Threads

  1. pine floor finishing
    By beanland in forum FINISHING
    Replies: 0
    Last Post: 14th April 2006, 02:02 PM
  2. Floating timber floor vs Vinyl timber floor ?
    By AshleyM in forum FLOORING
    Replies: 4
    Last Post: 4th July 2005, 08:04 PM
  3. Floor re-finishing
    By AndrewPatrol in forum FLOORING
    Replies: 1
    Last Post: 20th December 2004, 05:15 PM
  4. First time floor finishing help!
    By Robyn in forum FINISHING
    Replies: 3
    Last Post: 29th August 2003, 12:17 PM
  5. Sanding & Finishing Timber floor
    By Paul in forum FINISHING
    Replies: 2
    Last Post: 5th July 2000, 07:12 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •