![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 15 of 20
Thread: G'day from Canberra, Australia
-
3rd February 2014, 09:11 PM #1
G'day from Canberra, Australia
Hi,
I'm 30-years-old, did own a wood lathe and did some turning a few years ago but then lost interest for a while … now I'm a home-owner, back from a few years living overseas, settling down and getting back into woodwork.
Planning a few indoor and outdoor projects, the latter with spotted gum, blackbutt, merbau etc — I'd prefer not to use the latter due to unsustainable forestry practices but it is bloody nice wood.
Mostly Ozito kit except for my jigsaw and planer; also trying to convince my wife to let me get a Hitachi router and dream of owning a thicknesser one day (or will just get the el cheapo 909, Ozito or Ryobi).
I'd post a pic of my latest project - a planter box - but my account hasn't been properly approved yet so it'll probably fail; maybe later.
Here's my latest project and my first decent woodworking project in years (building all the raised garden beds and other bits and pieces don't count as they're either rough as guts or not finished nicely). Bevelled corners, hand-chiselled blind mortise and tenon joints on cross beams between uprights along short sides, countersunk screws, wire brushed, oiled and sanded.
Spotted gum decking boards and Merbau 40x40 beams (to which I lost two screws and a drill bit, still in the wood) sourced from Monaro Timber in Queanbeyan, NSW.
planter_twitpic.jpg
-
4th February 2014, 03:25 AM #2
Retired
- Join Date
- May 2012
- Location
- Canberra
- Posts
- 122
Another Canberran! There seems to be a mighty number of us!
Welcome and we look forward to pictures (it seems to be one of the rules and common catch cries!)
-
4th February 2014, 07:03 AM #3
Welcome to the forum.
-
4th February 2014, 08:07 AM #4
-
4th February 2014, 09:42 AM #5
Retired
- Join Date
- May 2012
- Location
- Canberra
- Posts
- 122
Many pros and cons!
Pros
- parking at the front door when shopping
- peak minute is finished by 8.52am
- schools are wonderful
Cons
- No carbatech or woodwork shop presence
- my mates live in north belconnen. It feels like a mighty long drive!
- no one moves to the left! Arrrggghhhh!
- the 39 degree days are getting a bit much!
Look forward to hearing your travails. Don't forget to look at the FOR SALE section. Some good bargains there.
-
4th February 2014, 11:10 AM #6
GOLD MEMBER
- Join Date
- May 2013
- Location
- Rockhampton QLD
- Age
- 69
- Posts
- 1,570
Welcome to the forum.
-
4th February 2014, 02:08 PM #7
Welcome to the forum!
As Ev said there seems to be an ever growing number of these people in Canberra that play with wood! .we may have enough numbers to start our own guild
Welcome again, enjoy!
-
4th February 2014, 02:44 PM #8
G'Day & Welcome to a top forum "Nathanael".
There are quite a few members in and around Canberra.....
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
Enjoy the forum.
Enjoy your woodwork...
Cheers crowie
PS - On the better tools, keep an eye out for garage sales, deceased estates, clearance sales and the like as good older tools are just as good if not better than what a lot of the hardware stores sells these days.....Also make sure you make your wifes requested projects first and you might find the flow of tools come....lol.
-
4th February 2014, 03:00 PM #9
Welcome aboard Nathan
Regards Rumnut.
SimplyWoodwork
Qld. Australia.
-
4th February 2014, 08:34 PM #10
Welcome to the forums, enjoy
)
Cheers
Tony
-
7th February 2014, 07:41 AM #11
welcome aboard
-
7th February 2014, 10:12 AM #12
You did own a lathe. Did you sell it? Do you have one now?
-
7th February 2014, 11:04 AM #13
Yeah sold it about 10 years ago I think. Was fun, but there's only so many bowls you can make and at the time that was the only type of woodworking I was interested in. I think I did a few classes with a woodturner who lived on Majura Avenue near North Ainslie Primary. May have even been Graeme Bensley?
-
7th February 2014, 04:16 PM #14
Senior Member
- Join Date
- Aug 2008
- Location
- Canberra
- Posts
- 16
Hey Nathan, good to see you on the forum. Evan is right, everyone here likes photos of whatever project you do!
-
13th February 2014, 01:55 AM #15
Retired
- Join Date
- May 2012
- Location
- Canberra
- Posts
- 122
ah! I see the problem here everyone! Our newbie must have suffered a head injury or became "newly married". He didn't loose interest, he was just DISTRACTED.
At first I thought I wasn't reading this right. I'm studying Japanese and Italian at the moment so sometimes the words all get mixed up in my poor mushy brain!....so when I read "there's only so many bowls you can make" Im pretty sure it's something colloquial like "there are ONLY 24 hours in a day to make them", or "I need food occasionally"....or "loosing that finger last week has slowed me down A BIT".
I almost misunderstood what was written.....
Similar Threads
-
Hi from Canberra, Australia
By delbs in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 8Last Post: 5th October 2012, 07:34 PM -
G'day all from Canberra Australia
By The Dog House in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 4Last Post: 20th April 2012, 10:36 PM -
G'day from Canberra..
By ssreddogv8 in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 5Last Post: 10th March 2011, 10:11 PM -
Hello from Canberra
By SuperDave in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 4Last Post: 31st July 2009, 11:48 PM