Thanks: 1
Likes: 13
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Silky oak jewellery box
-
26th January 2015, 10:13 PM #1
Silky oak jewellery box
Have had 10 jewellery/keepsake boxes gathering dust in the workshop for over twelve months. I guess you could say the glue joints are now dry? This one is the first to get finished, it is northern silky oak (cardwellius sublimus). Box joints were done on the table saw with a saw blade that has a flat top to the teeth, using my home made jig. Not sure what the veneer panels in the lid is, but the veneer inlay banding is my own creation. The inside lining is silver ash with red felt on the bottom inside. Three coats of sanding sealer and three sprayed coats of lacquer. Rubbed back with oooo steel wool and buffed up with Ubeaut's EEE. Doesn't look to bad.
C and C welcome.
Jim
Silky oak box openS.jpgSilky oak boxS.jpgSometimes in the daily challenges that life gives us, we miss what is really important...
-
26th January 2015, 11:02 PM #2SENIOR MEMBER
- Join Date
- Jun 2007
- Location
- Blue Mountains
- Posts
- 601
Looks great!
can you post a couple more pics of the lid and banding?
cheers,
ajw
-
26th January 2015, 11:07 PM #3