![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
Thread: Blotches on Tas Myrtle
-
26th January 2010, 09:17 PM #1
GOLD MEMBER
- Join Date
- Sep 2004
- Location
- Melbourne
- Age
- 87
- Posts
- 0
Blotches on Tas Myrtle
Hi all. I have cut some 2mm veneers for a table top and some of the veneers showed these blotches. They looked like an oil but I have tried rubbing with thinners,turps and acetone all of which did nothing. Can anyone offer any suggestions as I feel that when I put a finish on the top the blotches will be a bit unsightly .
Cheers Peter
I've just become an optimist . Iv'e made a 25 year plan -oopps I've had a few birthdays - better make that a 20 year plan
-
28th January 2010, 11:19 AM #2
The only suggestion I can give, is to coat the veneer a couple of light coats of white shellac and then apply your finish. The shellac should help with the blotchiness.
cheers
WendyBox Challenge 2011 - Check out the amazing Boxes!
Twist One - Wooden Hinge/Latch/Catch/Handle
Twist Two - Found Object
Twist Three - Anything Goes
-
28th January 2010, 09:58 PM #3
GOLD MEMBER
- Join Date
- Sep 2004
- Location
- Melbourne
- Age
- 87
- Posts
- 0
Thanks for that suggestion Wendy . I tried that with a sample piece of veneer. Coated one side with 2 coats of white shellac ( 2 years old)and then apllied NC finish to each side . The shellac helped a little but did not make it vanish so the spots ,if they do not fade over time will have to be a conversation piece . Luckily the spots are only on the butterfly extension panel of an extension table.
Cheers
PeterI've just become an optimist . Iv'e made a 25 year plan -oopps I've had a few birthdays - better make that a 20 year plan
-
29th January 2010, 06:29 AM #4
Similar Threads
-
Deck has blotches after oiling, need advice please
By Zolt in forum DECKINGReplies: 2Last Post: 6th April 2008, 10:48 PM -
Blotches on my Jarrah
By Pete in forum FINISHINGReplies: 8Last Post: 20th June 2001, 12:41 AM