![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
-
13th February 2021, 01:16 PM #1
SENIOR MEMBER
- Join Date
- May 2019
- Location
- Adelaide
- Age
- 63
- Posts
- 23
Sanding belts (need recommendation)
Hi, I tend to use two particular belts, generally 120 and 180 grit in 25x 762 and 100 x 914, I’ve ordered some from the site sponsor, they are Klingspor with a taped joint
I’m trying to avoid the “clunk” you get as the joint passes the work piece, anyone offer any tips and is a taped joint the best way to go?
cheersLast edited by Potts; 13th February 2021 at 01:17 PM. Reason: Spelling