Results 1 to 7 of 7
  1. #1
    Join Date
    Nov 2011
    Location
    Mudgeeraba, Gold Coast
    Age
    84
    Posts
    40

    Default Sealing the Dining Table

    I am in the process of scraping down the Cypress dining table top for a new sealing coat. I made this table about 10 years ago and since then it has been sanded and had a couple of coats of water based polyurethane.

    It is situated on the verandah where it does get a bit of winter sun and the odd misting in stormy weather, not to mention the occasional visit and marking by the local possum.

    It is still coming up very nicely with the scraping and I feel there is probably a better finish I can apply. Keeping in mind we are in a semi rural situation and would like a reasonably quick drying solution to avoid dust and leaf deposits.

    Open to suggestions from the brains trust and hoping that an oil finish of some variety is possible this time.

    Thanking you in anticipation,
    Cheers, Fred

  2. #2
    Join Date
    May 2015
    Location
    Brisbane
    Posts
    49

    Default

    Why not just oil it? no more scraping, easy to apply, easy to clean and when required you can recoat in just a few minutes.

  3. #3
    Join Date
    Nov 2011
    Location
    Mudgeeraba, Gold Coast
    Age
    84
    Posts
    40

    Default

    Thanks double.d but it needs a good scrape to get rid of a tatty looking surface. Some flaking sealer and the odd mouldy spot. It is used all the time as a general outdoor dining and all purpose table.
    What oil would you suggest?

  4. #4
    Join Date
    May 2015
    Location
    Brisbane
    Posts
    49

    Default

    Yes, you would need to scrape all the poly off and then sand to 240g. I would recommend Constantia Organic Finishes 100 % Australian organic oils and waxes. The Chinese ( by name only) Wood Oil is good for interior and exterior applications.

  5. #5
    Join Date
    Feb 2016
    Location
    Canberra
    Posts
    1,183

    Default

    How about an outdoor Spar Marine poly for boats/decks?

    Feast Watson 500ml Spar Marine Varnish - Bunnings Australia

    If the furniture is outside, its essentially a deck or a boat

  6. #6
    Join Date
    Jan 2016
    Location
    Adelaide
    Posts
    8

    Default

    Hi Dareen - I have just done a similar table, similar position.
    Used Livos Natural Wood Sealer on it.(Many coats). Seems to be holding well.
    Am doing another one trialing Evan Dunstone's recipe - in Woodsmith #157 - which uses a mix of the Livos Natural Oil Sealer, Spar Marine Varnish and Turps.
    PM me if the article is of interest and will email a PDF copy. Cheers GrahameM GM2

  7. #7
    Join Date
    Nov 2011
    Location
    Mudgeeraba, Gold Coast
    Age
    84
    Posts
    40

    Default

    Hi double.d, woodpixel and GM2.
    Thank you for your recommended solutions to my query.
    I will have a look at these and put up a photo of the finished product.
    Thanks again,
    Cheers, Fred

Similar Threads

  1. Sealing a Table for outdoor use.
    By smidsy in forum FINISHING
    Replies: 3
    Last Post: 4th December 2020, 01:24 PM
  2. Sealing a table top
    By Heardy in forum FINISHING
    Replies: 3
    Last Post: 2nd January 2016, 09:39 PM
  3. sealing a jarrah burl to be used as a table top
    By newstart in forum FINISHING
    Replies: 1
    Last Post: 14th August 2012, 11:33 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •