![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 15 of 18
-
7th February 2010, 02:26 AM #1
New Member
- Join Date
- Feb 2010
- Location
- Perth
- Posts
- 2
Hiya. Female seeking some advice.
Hi All. I have a 46 yr old double brick house in Perth. There are about half a dozen cracks in the internal walls.
Firstly I got an architect (from Archicentre) to provide me with a general report on the condition of the house before I purchased.
In general the report was pretty clean however the architect advised that the cracking was likely due to the water run off from the roof just pouring on to the land. No trenches, no drains, no run off to any drains that would go to stormwater.
So I bought the property as the architect advised that what would be needed would be pipes to be run from the downpipes to a sump which we would need to put on the property and then run this to the council stormwater drains. He estimated the cost would be roughly $6 to $8K. However to be completely sure his advice was to get a report from a structural engineer.
I purchased the house. I then got a structural engineer to write me a report. His advice was that there was movement due to the water runoff and we could remedy this by doing a series of things. The first one being to do as the architect had previously advised. $8000 later and without doing step 3 & 4 I called a plasterer who came highly recommended from a contact. The plaster (with 50 years experience) came to the house and advised that the cracks were very minimal and that they were caused by something else which fell into two areas. What the plasterer told me seemed very logical. However after paying for a architects report and an engineers report it would appear that this is possibly money down the drain. Or it would appear that years of experience (the plasterer) vs little experience but qualified 'experts' come up with two very different reasons.
Who does one believe or listen to? Advice that is well paid for or advice that was free?
Just thought I would share this with you and whilst I don't have a lot of experience in these matters my father who resides overseas (is now 85) was not tertiary qualified however as a draftsperson in earlier years and then a Project Manager in later years for building projects worth up to $2Mill it seems to me that often we need to value experience over 'written reports' by 'experts' or so it seemed from the advice that I have received from the plaster.
Your comments would be appreciated.
Firstly good morning and thank you everyone for all this terrific advice.
I have attached photos of cracking for the following reasons:
I had already investigated the installation of tanks. I have a large roof area which the 'rainwater tank specialist' staff advised that I would need lots of tanks (slimline only) due to space around the home which would probably only catch some of the water and there would still be a lot of overflow. Two quotes were received and it was still perceived that the drains and pipes would still need to be installed. As the pipework was $8000K and that tanks quote for the property was $13000 all up I took the cheaper option knowing that I can install water tanks at a later date as opposed to do water tanks first and still have to get these drains/pipes installed underground and pay for a sump so that water can go to stormwater. I have only recently had this done.
To then have a plasterer with years of experience say to me that did I notice the cracks in the walls are all common to being above light switches. And what he believes has happened is that the conduit and installation of conduit has weakened these specific areas. And considering that these are the only places where there are cracks it seemed to me to be a logical response.
There is one exception and that is there is a slight crack in the ceiling and also a little sagging which the plasterer advises that once he has a look in the ceiling it may well have something (in this particular area only) to do with the covering of the beam in a old coconut husk type stuff having been worn away. Now he can recover this with a fibreglass type mesh stuff which he showed me.
I guess what I find intriguing is that the architects original report also advised that there was perhaps this sagging due to a hot water tank in the roof above the frame with the largest crack. And he said more likely it is full of water and it is too heavy etc. So after the purchase of the house my partner went up to the roof cavity and found that the tank was empty. We understand that the architect probably poked his head up the manhole and shone a torch and saw the tank and it went into report.
However for a plasterer to come along not be concerned about getting the job, tell me what he thinks may be causing the cracks, I tell him about my two reports, he then reads them and says whatever you do do not continue along this written advice as you will spend a lot of money and not necessarily so. I was quite shocked. He said that I might be better off getting another independent person to perhaps advise both sets of advice and then choose from there. But this man has been in the game for a very long time and he freely showed me what the cracks had very much in common. He also thought the house was very structurally sound and that it wasn't right to spend $8000 when perhaps the cracks have been caused by something else.
And yes my house is on sand and yes after 46 yrs it has very little cracking. We just wanted to make sure that we did the right thing structurally for future owners and now feel perhaps a little fleeced. Or it does make one wish to question more I guess.
Your thoughts?Last edited by Okeroa; 7th February 2010 at 11:40 AM. Reason: Update with photos
-
7th February 2010, 07:51 AM #2
id trust an experianced tradesman long before il listen to an educated idiot.
www.carlweiss.com.au
Mobile Sawmilling & Logging Service
8" & 10" Lucas Mills, bobcat, 4wd tractor, 12 ton dozer, stihl saws.
-
7th February 2010, 08:51 AM #3
New Member
- Join Date
- Feb 2010
- Location
- Newcastle
- Posts
- 2
hey im new to the forum but yes go all the way with experience those engineers and that would be just out of uni and only a few years experience n its not really the area of work so go wih the tradesman
-
7th February 2010, 08:58 AM #4
GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 102
I thought Perth was largely sandy, and that you would not have much trouble with water settling. That was the case when we lived in Ardross bak in the 1970s.
I would listen to a local tradesman first, then if his less expensive suggestions did not work, then go with the architect's recommendationregards,
Dengy
-
7th February 2010, 09:03 AM #5
If there is no provision for storm and rainwater runoff, you are going to get problems of one kind or another.
Seems a shame that rainwater has no tanks to go to for re-use. Over here there are government subsidies to install rain tanks, perhaps it is the same in the west?
At the very least, installing rain tanks away from the house takes away the roof runoff, sends the tank overflow onwards and keeps the house and its foundations dry.
Worth a thought. I would do something about your water runoff though and my solution would be tanks followed by sending the tank overflow on its way into stormwater drains if they are available.
Cheers
SG.... some old things are lovely
Warm still with the life of forgotten men who made them ........................D.H. Lawrence
https://thevillagewoodworker.blogspot.com/
-
7th February 2010, 09:10 AM #6
I have had good and bad with both, some plasterers can't even patch a crack let alone know what caused it and the same goes for Architects, as said above, many are educated idiots with no practical experience, theory is just that, a theory. Theory with practical experience is the goods if you can find it.
Oh and welcome to the forum.
-
7th February 2010, 09:20 AM #7
Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 0
G'day Okeroa and welcome aboard.!!
Bit of a quandry you have there.Scribbly's idea of rainwater tanks is a good one as you can still send any excess overflow to the council stormwater system.
As for the solutions offered by the architect and the engineer you need to rememeber that they are offering "top- end solutions" - probably in order to protect themselves from future court action if things go wrong.
-
7th February 2010, 09:23 AM #8
SENIOR MEMBER
- Join Date
- Oct 2008
- Location
- Gold Coast
- Age
- 50
- Posts
- 0
as a carpenter, i could probably work out what is happening. if i could not work it out. my first call would be a licensed builder. luckily i know a few.
they deal with building problems on a daily basis and they are the people who actually rectify the problem.
an architect can point his finger and say this and that is the problem, but they never get their hands dirty. so i would take their advice with a pinch of salt.
not in a million years would i want advice from an architect, or a plasterer for that matter.
but a good engineer is priceless.
as was stated before, as long as the engineer is not a snotty nosed kid still wearing nappies, then their advice is usually pretty good.
next time call a builder, then if the builder recommends talking to an engineer, do so.
regards, justin.
-
7th February 2010, 09:27 AM #9
I'd go the experienced engineer (with local knowledge) route if possible too but it can be tough when there's legal requirements that need some doofus with a bit of paper and a few letters after their name to sign off on something. (No offence to the non-doofuses with bits of paper and the letters
)
It can be really tricky. Either way it's possible to get the wrong information and get ripped off.
I was going to buy a block of land a few years ago and asked the estate agent if it was possible to build a house on it and get utilities hooked up to it and he said "yeh no worries". Something didn't feel right so I went to council and it had an Aboriginal Heritage protection on it (if I dug up an artifact work had to stop), was in a flood zone, and I couldn't cut down trees to make room for a bloody tent. Basically the complete opposite of what I'd been told. So sometimes when someone has money at stake, they'll tell you any old thing just to get you to buy or spend on it.
-
8th February 2010, 04:02 AM #10
Hu Okerora..
I owned an old house in Rivervale for about 22 years until moving to Cannington. I have never heard of drainage being a problem in WA. With our sandy soil drainage is not usually a drama unless your house is in an area with clay, as in Lesmurdie or Kalamunda where the clay expands in winter with the rain then contracts in summer as it dries out.
My old place had a few cracks in the plaster but they didn't go right through the bricks. I would get some more opinions before shelling out more money.
-
8th February 2010, 10:11 AM #11
Firstly welcome to the forum.
Some very interesting advise. I find it very hard to comment on this as when you think about something then look at why this is the case I am sure that you will find another reason.
I am sorry but as you have already spent the money and completed the job it is too late to go back. I understand your logic for putting in the rainwater tanks at a later stage. Would you need all of them to go in at the same time? It there other options to the standard rainwater tanks? Can you complete this your self?
-
8th February 2010, 11:42 PM #12
Novice
- Join Date
- Feb 2010
- Location
- Perth
- Posts
- 11
True what you say Beer...sand doesn't hold water..clay does. My first thoughts would be to remove some of the plaster and see if the cracks go right through the wall. Without doing that you don't really know what you're dealing with.
-
9th February 2010, 01:56 AM #13
cracks
A bit more info would be good...
Type of plaster e.g. gyprock on timber stud walls or solid plaster on a brick/block wall
If lets say it's gyprock on a timber stud wall.... it would be unusual for any conduit/wiring to be in the plaster, the wiring is usually in the cavity that is provided by the timber studs and well clear of the plaster, the wiring will come thru a hole in the plaster and or stud if the light switch is archatrave mounted but wouldn't cause a crack like you have.
If it is a solid type masonary wall, (block/brick) it is likely that wiring may well have been chased into the wall before the plastering was done, it is also likely that if sparky was there as the block/bricks are layed that wiring will be in conduit within the wall itself and not chased into the surface of the block/bricks and therefore less likley to be the cause of your cracking....if wiring was chased (groove cut into blocks for wiring to run) then plastered over and was the cause of cracking it is likely that the crack will follow the chased out groove and will be a relatively straight line...this is probly what your plasterer bloke is thinking.
The thing that has meis the cracks are somewhat jagged, originate from the corner of what I am assuming is the corner of the door opening and goes across the cornice, also it looks like the cornice is cracking at the wall cornice junction, without further info or looking it has me thinking movement of some sort, it may be rain related ground movement
or some other cause and if so I be thinking of getting a few more opinions...a good builder...a good civil engineer
How many cracks are there? Do they all originate from the corner of the door opening? Is it just above one door and the pics r from either side of the door?
Are you on a solid concrete raft slab? at ground level or Bored piers and posts?
Welcome to the forum btw
Peter
-
9th February 2010, 07:01 AM #14
As pjt said, the cracks through the corner and cornice look more like ground movement to me.
Any new extensions or building works happed lately? Smimming pools etc.
-
9th February 2010, 08:21 PM #15
GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 102
If it is a sand base, then there should not be any ground movement.
Get the plaster opened around one of the cracks and see it there is any cracking in the bricks underneath. If there is, then you need to get a Civil Engineer on site to look at it, preferably a local one who does footings and foundations for a living in your area.
Any good professional Architect should not be advising on ground movements and wall cracking - that is not their area of expertise, and he would be putting his professional indemnity at risk.
If there was ground movement in a double brick house, then the cracks would be obvious in the external walls as wellregards,
Dengy
Similar Threads
-
seeking optomerist advice
By jow104 in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 26Last Post: 27th March 2009, 06:56 PM -
Seeking Advice
By pal in forum FINISHINGReplies: 18Last Post: 19th March 2008, 04:03 PM -
Seeking Advice On TV, DVD & VCR Set Up
By Metal Head in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 22Last Post: 23rd April 2007, 01:51 PM