![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
Thread: Walk in pantry shelves
-
29th October 2007, 10:21 AM #1
New Member
- Join Date
- Oct 2007
- Location
- Brisbane
- Posts
- 4
Walk in pantry shelves
Hi,<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
Have built a "Walk In" pantry in the newly renovated kitchen, and was after some advice on building the shelving. <o:p></o:p>
I was wondering if anyone could advise me on the best distances between the shelves would be? The floor to ceiling height is 2.4m<o:p></o:p>
<o:p></o:p>
Secondly as it’s a corner walk in, the shelves will be an "L' shape, what’s the best way to install them so as they don’t tend to sag in the middle? <o:p></o:p>
And lastly is getting a cabinet maker to cut the shelves out of melamine to size? <o:p></o:p>
Thanks for your help in advance!<o:p></o:p>
Lindsey<o:p></o:p>
<O:p</O:p
-
29th October 2007, 10:47 AM #2
hi and welcome to the forum!
If you have a plan of the pantry, please post it - when I designed our WIP I thought about what we would store in it and decided to make shelving that in parts was very narrow, to cater only for tins (two deep) and at one end was around 40CMs deep for cereal boxes etc. There is a range of ways to cater for sagging, but it is hard to know without dimension drawings...... a rule of thumb would be "the more bracing, the better" At least with melamine you can cut it with rounded corners etc, which can be a little more pleasing to the eye.Steve
Kilmore (Melbourne-ish)
Australia
....catchy phrase here
-
29th October 2007, 02:49 PM #3
Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 1,460
The optimum height of the shelves is dependant on what you want to store in the pantry, as it depends on the type and size of canisters and bottles and cans you want to store.
The best idea is to let your wife decide on the canister storage system that she would like, then let her buy all of them that she needs , and more for later on, and then you can design the system.
That's what we did, we settled on the clickclack system of canisters. Bought the lot and then I built the shelving specifically for them. I also incorporated pull out wire baskets and the 2 freezers into the pantry.
But let your wife do the designing and then, even if it doesn't work out, you cannot be wrong.
Peter.
-
29th October 2007, 04:02 PM #4
.......which has no bearing on whether it will end up "your fault" or not
Steve
Kilmore (Melbourne-ish)
Australia
....catchy phrase here
Similar Threads
-
12' MDF shelves with Kwila Trim
By barrysumpter in forum FINISHINGReplies: 3Last Post: 30th May 2000, 02:10 PM