Results 1 to 5 of 5
  1. #1
    Join Date
    Nov 2008
    Location
    Perth
    Posts
    5

    Default How do you stop Jarrah from fading?

    Hi PPL

    I have a Jarrah board that is normally attached to the front of my house with some brass numbers on it that denote my street address. The board is under eaves facing south so is never exposed to direct sunlight.

    It was originally finished with "Sanding Sealer" and satin "Estapol".

    It has been up for probably 8 years and I have taken it down to polish the brass and refinish the Jarrah. The Jarrah is still a nice red colour where the brass numbers covered it but the rest was severely faded. I have sanded it back to almost original colour (a bit left to go).

    Are there ways to reduce the Jarrah fade with a different finish?

    Geoff

  2. #2
    Join Date
    Oct 2006
    Location
    Tallahassee FL USA
    Age
    82
    Posts
    0

    Default

    Probably not. About the best you can do, I think, is to use something like Spar Varnish, with specifications including UV stabilised, or similar terminology. Most timber will change colour even in indirect sunlight. Some get lighter, some get darker. Some go the extreme end of either range. Red cedar goes grey; purpleheart goes brown; cherry goes dark red; etc.

    Perhaps someone will chime in with a magic potion for Jarrah, of course.

    Joe
    Of course truth is stranger than fiction.
    Fiction has to make sense. - Mark Twain

  3. #3
    Join Date
    Sep 2005
    Location
    Mahogany Creek, Western Australia
    Age
    72
    Posts
    3

    Default

    Quote Originally Posted by Geoff2005 View Post
    Hi PPL

    I have a Jarrah board that is normally attached to the front of my house with some brass numbers on it that denote my street address. The board is under eaves facing south so is never exposed to direct sunlight.

    It was originally finished with "Sanding Sealer" and satin "Estapol".

    It has been up for probably 8 years and I have taken it down to polish the brass and refinish the Jarrah. The Jarrah is still a nice red colour where the brass numbers covered it but the rest was severely faded. I have sanded it back to almost original colour (a bit left to go).

    Are there ways to reduce the Jarrah fade with a different finish?

    Geoff
    Joe's right. UV is the enemy. I built a boat and used jarrah extensively for such things as the gunwales, hand rails, and a few other items. What I did in that case was to coat the timber (the whole boat, actually) with West Systems epoxy - 2 coats- and then about 5 of marine varnish. The jarrah looked as healthy as the day it got coated some 15 years later with only a couple of light cut-backs and replacement of the marine varnish.

    Worked a treat on the wandoo cleats as well, and the brightwork sides stayed lovely hand clear too. Hope that helps.

    Michael
    "In theory, there is no difference between theory and practice. In practice, there is." Yogi Berra

    "Experience is the name every one gives to their mistakes." Oscar Wilde

    "Whether you think you can or whether you think you can't, you're right." Henry Ford

    My website: www.xylophile.com.au

  4. #4
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    723

    Default

    I second that for the West Epoxy and varnish route. Probably the best solution you'll find for any timber exposed to the elements.

  5. #5
    Join Date
    Nov 2008
    Location
    Perth
    Posts
    5

    Default

    Thanks for the feedback.

    I'll chase up the West Systems epoxy route

    Geoff

Similar Threads

  1. artificially fading ceder
    By astrid in forum FINISHING
    Replies: 15
    Last Post: 16th October 2007, 08:45 PM
  2. Did you ever stop and wonder......
    By Kaiser Soze in forum JOKES
    Replies: 1
    Last Post: 4th September 2007, 11:04 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •