Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: lathe accuracy
-
14th May 2024, 05:11 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,458
lathe accuracy
with a 1inch bar x 4 inch length of cut at 0.0001 doc unsupported ( not using tailstock)
what sort of accuracy should one expect on an AL960...including a non adjusted spring cut?
Read the full thread at metalworkforums.com...