Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Lathe centre height methods
-
26th April 2024, 11:40 AM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,458
Lathe centre height methods
Recently I discovered how important it is to centre your lathe tools exactly on centre . I find that the visual method using the tailstock as a guide is just not accurate enough. I had one of the bubble level things , it seemed to be good solution but it has disappeared .. probably would be a nice project to make one of the bubble centre tools.
Read the full thread at metalworkforums.com...