![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 5 of 5
Thread: new
-
6th December 2011, 06:04 PM #1
New Member
- Join Date
- Dec 2011
- Location
- Qeensland. bush
- Posts
- 2
new
gday all thought it might be a good idear to join the site as im young fella tryin to start my own milling buisnes but mostly cutin split post and ect at moment.so if any one interested in any off abouve give me a yell.Seth Machno .
-
6th December 2011, 06:30 PM #2
.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 1,174
Welcome SM. Have you seen the small timber milling forum? It sounds like you could fit right in there.
SMALL TIMBER MILLING - Woodwork Forums
-
8th December 2011, 08:38 AM #3
New Member
- Join Date
- Dec 2011
- Location
- Qeensland. bush
- Posts
- 2
ok bob cheers i hav a look
-
9th December 2011, 08:21 PM #4
Welcome to the forum. We are an assorted bunch.
-
17th December 2011, 07:47 AM #5
Welcome to the forum