Results 1 to 3 of 3
  1. #1
    Join Date
    Jun 2000
    Posts
    1

    Question Sanding Sealers / Grain Fillers

    I'm new to woodworking and have recently finished a blackbutt bookcase with sheaoak lining boards. I have used a tried and tested oil/wax method as supplied by Gary White. After going through the finishing process I found that the sheaoak had a more consistent and higher sheen finish than the blackbutt. I mentioned this to a friend that has done a lot of french polishing and he suggested that I should use a sanding sealer or grain filler prior to finishing. I would like to know what more experienced woodworkers have to say on this and if there is any preference to product and its use.

    Thanks

    Scott

  2. #2
    Join Date
    Mar 2000
    Location
    Mallabula, NSW
    Posts
    13

    Talking

    Scott, I fell deeply in love with Feast Watson sanding sealer about 12 months ago. I sand to a very smooth finish, then I rub in FW sealer so that no pools or shiny bits are left. Then I sand with very fine paper (800+) very lightly. Someone else on this BB suggested very fine steel wool instead; that's probably good advice but I get good results with the fine paper. After that, finish it with poly, wax, or whatever you prefer. The big advantage of the sealer is that it seals and thus protects the wood. As far as I know, all waxes and oils lose their protective qualities much more quickly if you don't use sealer. My preference is satin poly rubbed in so that each coat is very, very, very thin. Hope this helps! Rick
    RFNK

  3. #3

    Post

    Sanding sealers are not intended for filling the grains of woods.
    Paste wood fillers are made for this purpose.
    If the filling is done right, it will reduce the amount of time, and coatings you will need to complete the work.
    MacS

    ------------------

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •