Results 1 to 5 of 5
  1. #1
    Join Date
    Jun 2011
    Location
    Melbourne
    Posts
    2

    Default Linseed finish for tool handles

    I've currently restoring an old Stanley plane. It's by no means a collector's item - it's post WWII, has several different names engraved on it, and is chipped to buggery (though not in such a way as to affect usability, or so I hope).

    I've removed the lacquer on the handles (it was crumbly and rather sharp / unpleasant to hold) and am trying to decide on a new finish.

    I was considering using a mixture of raw linseed oil and turps. Growing up on a farm, this was used for all outdoor tools, and worked fine. I also imagine it would be less likely to raise blisters than poly (the other option).

    Is this appropriate for tool handles?

  2. #2
    Join Date
    Feb 2007
    Location
    blue mountains
    Posts
    3

    Default

    I have applied boiled linseed to all my wooden bodied planes and the wood handles of some old stanley planes. Also saw handles. The boiled oil dries hard where the raw never really dries but soakes in. Raw is the best bet for outdoor tools.
    Linseed is a traditional old finish and can be refreshed with just a wipe over any time you like.
    Regards

  3. #3
    Join Date
    May 2010
    Location
    Wellington, NZ
    Posts
    0

    Default

    I used several coats of tung oil on mine. Boiled linseed is also excellent for the task. Danish oil can work too.

    I very much agree with using oil finishes on tool handles - natural wood feels so much nicer than the plasticky feel you get from polyurethane or lacquer.

  4. #4
    Join Date
    Feb 2011
    Location
    Melbourne
    Posts
    206

    Default Linseed for tools

    the aussie army use the Livos linseed based oils for their pic handles, so why not. it nourishes the timber and when need be, reapply.

  5. #5
    Join Date
    Mar 2008
    Location
    Lambton, Newcastle, NSW, Australia
    Posts
    1

    Default

    Yep all my handles get a wipe with BLO every few months
    Instagram: mark_aylward
    www.solidwoodfurniture.com.au


    A good edge takes a little sweat!!

Similar Threads

  1. Linseed Oil for tool handles
    By matto1 in forum FINISHING
    Replies: 4
    Last Post: 5th September 2008, 09:13 PM
  2. fix a linseed finish
    By duskybells in forum FINISHING
    Replies: 2
    Last Post: 10th April 2008, 04:52 PM
  3. Finish over Boiled Linseed
    By Rodgera in forum FINISHING
    Replies: 1
    Last Post: 5th April 2003, 11:25 PM
  4. Finish for tool handles
    By Angelo in forum FINISHING
    Replies: 2
    Last Post: 7th April 2000, 09:18 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •