![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 2 of 2
-
16th July 2007, 01:36 PM #1
Sealing Norsjo Exterior Filler on weatherboards...
Hi,
We recently completed an extension on a weatherboard home and I noticed the painters filled the knots and nail holes in the weatherboards with an exterior filler called Norsjo. They sanded the patches (hundreds of them) and then sealed the patches with solver PSU, two top coats applied after that .....
When you look at the wall on an angle all the patch marks show out on the low sheen walls and it looks really ?????!
Do any painters out there know a better way of sealing the patches.... or is this just how it is....
Personally if this is how it is Id prefer not to patch the walls at all, it would look better.
Kind Regards,
-
16th July 2007, 01:56 PM #2
cack handed waster
- Join Date
- Feb 2006
- Location
- Melbourne
- Posts
- 26
my two bobs worth
if they sand it ok should be fine, best to prime area first though after scraping, rough sand and dusting off, sand and seal again, punch nails down as if you don't and it takes a knock filler will just pop out, seem jobs done without sealing before and it don't last that long, do not use it too thick as it takes ages to go off if too thick, bit like topping, do not use on any area deeper than about 1/2 mm
try to use low sheen at least on old boards, more reflective it is the more you see uneven work
try to not let it sit in the rain between working on it or on moist days, well this is what i do
remember paint jobs are 75% prep if done well, old houses that is
i prefer builders bog, dam site more solid, grips like my wife on me wallet, bit harder to sand (if need be use norsjo to finish off with skimming), with builders bog, just mix up small amounts till you get used to it, if working in full sun it goes off really quick, cost is not much more
i do loads of old houses up and skin over old uneven areas of weatherboard with norsjo - make sure you use the exterior one, if you are going to skim save yourself time by making sure bog don't sit proud if you are ging over it, if it does sand it first as they sand at different rates and saves you having to fill again
as i said this is what i do and my work stands up really well, as i said most of my work is old w/board houses so maybe, just maybe i know something about it
knot holes should be left unless they are ging to let water in
good luck, ???? jobLast edited by looney; 16th July 2007 at 01:57 PM. Reason: senile dementia
Similar Threads
-
Starter boards for weatherboards
By peter_sm in forum FLOORING, DECKING, STUMPS, etc.Replies: 2Last Post: 24th February 2008, 11:14 PM -
Sanding LOTS of 85year old VJ's & Weatherboards ... what to buy ?
By SteveAndBelle in forum PAINTING, PLASTERING, TILING, DECORATING, etc.Replies: 18Last Post: 27th March 2006, 06:17 PM