Results 1 to 4 of 4
  1. #1
    Join Date
    Mar 2011
    Location
    Gingin WA
    Posts
    1

    Default Buffing Organoil

    G'day to All. I'm a new member from Gingin WA. I have a question about finishing. When using Organoils Hard Burnishing oil the last stage is to power buff with lambs wool. My buffer has a range of 600-2000 rpm. As Im not sure of the theory behind the buffing can any one suggest what speed to use?

  2. #2
    Join Date
    Feb 2004
    Location
    Perth,WA
    Posts
    6

    Default

    Hi,
    Try asking the manufacturer (of the oil) perhaps.

    Hope it helps,
    Bob H.

  3. #3
    Join Date
    Dec 2008
    Location
    Eastern Australia
    Posts
    60

    Default

    I have used this product many times on tables and benches, the idea is to get it a bit warm so plenty of elbow grease is the go.

  4. #4
    Join Date
    Sep 2008
    Location
    Hamilton, VIC
    Posts
    0

    Default

    Start with the lower speed (I know the instructions don't specify what speed to use) and if you aren't getting the result you want, speed it up a bit. I probably wouldn't go right up to 2000 rpm, the lambswool might fall apart.

Similar Threads

  1. Question about Buffing Oil
    By hsc07ww in forum FINISHING
    Replies: 0
    Last Post: 24th June 2007, 04:12 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •