Page 1 of 2 12 LastLast
Results 1 to 15 of 19
  1. #1
    Join Date
    Mar 2008
    Location
    Cairns
    Posts
    229

    Default whats an alternative to 22m of trunking conduit???

    i wanted to lay 22m of 75x75mm trunking conduit along a top of a wall so it looks like its part of the building and not use round stuff but when i looked at the price of a 4m length of this stuff its around $150, i almost fell off my chair. i had to read the listings and look at a few different places to believe it as i thought it might have been a pack of 5 or something for that price but it wasn't.
    why is this stuff soo damn expensive??
    it will cost me almost $1k to run 22m of conduit. not going to happen.
    what can i use as an alternative to this stuff that is around a quarter of the price? anyone got any ideas?
    needs to be something that can be easy to add new cable to at a later date when i need to run more through it unlike round conduit which is real hard to do.
    ideas??

  2. #2
    Join Date
    Sep 2005
    Location
    Bendigo
    Age
    60
    Posts
    231

    Default

    You dont mention what service it needs to carry apart from "cable", so any regulation aside:

    Air con conduit ?
    75mm Duct Cover Plastic 2 meter length | 8 Buy only | SD-75-8 - Complete Air
    and joiners
    75mm Air Conditioner Joiner | SJ-75 - Complete Air

    16 metres for ~ $130:00

  3. #3
    Join Date
    Mar 2008
    Location
    Cairns
    Posts
    229

    Default

    Quote Originally Posted by droog View Post
    You dont mention what service it needs to carry apart from "cable", so any regulation aside:

    Air con conduit ?
    75mm Duct Cover Plastic 2 meter length | 8 Buy only | SD-75-8 - Complete Air
    and joiners
    75mm Air Conditioner Joiner | SJ-75 - Complete Air

    16 metres for ~ $130:00
    lots of low voltage twin cable and network cables, no 240v stuff.
    not really a fan of that a/c ducting, but if i have to i have to.
    any other ideas?

  4. #4
    Join Date
    Sep 2005
    Location
    Bendigo
    Age
    60
    Posts
    231

    Default

    Quote Originally Posted by wozzzzza View Post
    lots of low voltage twin cable and network cables, no 240v stuff.
    not really a fan of that a/c ducting, but if i have to i have to.
    any other ideas?
    A sheet metal supplier should be able to fold something up, two U shaped sections. Wont have nice joiners or end sections like a commercial conduit.

  5. #5
    Join Date
    Jun 2023
    Location
    Tasmania
    Posts
    11

    Default

    Rectangular pvc downpipe? Not quite size but cross section area not lot difference
    galvanised downpipe, custom made
    I just googled and seems they make any size any colour

  6. #6
    Join Date
    Sep 2009
    Location
    Newcastle
    Posts
    54

    Default

    Inside? Outside?
    How good does it have to look?

  7. #7
    Join Date
    Mar 2008
    Location
    Cairns
    Posts
    229

    Default

    Quote Originally Posted by pippin88 View Post
    Inside? Outside?
    How good does it have to look?
    outside and has to look pretty good.

  8. #8
    Join Date
    Apr 2019
    Location
    NSW
    Age
    38
    Posts
    311

    Default

    not really sure if it meets regs...

    can you put the cable in a proper conduit, the cheapest thing you can find. and then run that conduit in whatever PVC, metal, guttering etc pipe that looks nice?

  9. #9
    Join Date
    May 2023
    Location
    Maroochydore
    Age
    76
    Posts
    139

    Default

    Quote Originally Posted by havabeer69 View Post
    not really sure if it meets regs...

    can you put the cable in a proper conduit, the cheapest thing you can find. and then run that conduit in whatever PVC, metal, guttering etc pipe that looks nice?
    Probably best suggestion so far.
    Colorbond downpipe comes with big end small end for joining.
    Comes in 1.8, 2.4, 3, and 3.6 Metre lengths if I remember correctly.
    100x75 most common size.

  10. #10
    Join Date
    Mar 2008
    Location
    Cairns
    Posts
    229

    Default

    Quote Originally Posted by rambunctious View Post
    Probably best suggestion so far.
    Colorbond downpipe comes with big end small end for joining.
    Comes in 1.8, 2.4, 3, and 3.6 Metre lengths if I remember correctly.
    100x75 most common size.
    hard to run more cable after that is the issue

  11. #11
    Join Date
    May 2007
    Location
    Gold Coast
    Age
    71
    Posts
    456

    Default

    Quote Originally Posted by wozzzzza View Post
    hard to run more cable after that is the issue
    Leave a drawstring or two in the conduit when you do the first install?
    Franklin

  12. #12
    Join Date
    May 2023
    Location
    Melbourne
    Age
    56
    Posts
    20

    Default

    Quote Originally Posted by wozzzzza View Post
    hard to run more cable after that is the issue
    There is so much room in the 100x75, you could either pull through a drawstring as your pulling through you new cables or push through 5 lengths of 20mm conduit to attach a new draw string...should slide through easy.

    Other than that, have someone fold you up a box out of colorbond. Quash fold the front top side to take away any sharp edges and with a 10mm lip on the top fold so it covers the squash fold on the side and water tight. You can just open slightly and slip your new cables in when required.

    Deta 50 x 25mm Trunking - Bunnings Australia will cost you $120 and add more if/when required
    AussieDuct CD5050WH | Maxi Cable Ducting With Lid 50mm x 50mm x 4M PVC | White (sparkydirect.com.au) bigger stuff $350

  13. #13
    Join Date
    Mar 2008
    Location
    Cairns
    Posts
    229

    Default

    i have found it, i will be using 80mm cool duct. it is pretty much the same as trunking conduit and 10 times cheaper.

  14. #14
    Join Date
    Sep 2005
    Location
    Bendigo
    Age
    60
    Posts
    231

    Default

    Quote Originally Posted by wozzzzza View Post
    i have found it, i will be using 80mm cool duct. it is pretty much the same as trunking conduit and 10 times cheaper.
    Google of “cool duct” or “80mm cool duct” does not return any specific matches for the item.
    Care to share a link for reference ?

  15. #15
    Join Date
    Mar 2008
    Location
    Cairns
    Posts
    229

    Default

    Quote Originally Posted by droog View Post
    Google of “cool duct” or “80mm cool duct” does not return any specific matches for the item.
    Care to share a link for reference ?
    that's just it, i cant find it either, here's a pic of an aircon job i did earlier in the year using it. apparently exclusive to acdtrade, i had to call them today to find out about it.
    Attached Images Attached Images

Similar Threads

  1. Conduit Spacing
    By Reno RSS Feed in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 0
    Last Post: 19th April 2009, 12:10 PM
  2. whats an alternative to pura tap?
    By ubeaut in forum GENERAL ODDS N SODS
    Replies: 0
    Last Post: 23rd March 2009, 10:50 PM
  3. where to get and whats it called? metal conduit cover for external walls
    By ubeaut in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 0
    Last Post: 16th November 2008, 07:10 AM
  4. spray guns - whats good and whats not!!
    By Rowan in forum FINISHING
    Replies: 14
    Last Post: 17th January 2004, 07:22 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •