Results 1 to 4 of 4
  1. #1
    Join Date
    Jul 2003
    Location
    Melbourne
    Age
    53
    Posts
    1

    Default HVLP Turbine Recommendations needed.

    Hi All, my compressor is on it last legs and since I only really use it for spraying I am considering replacing it with a dedicated HVLP Turbine setup.

    I know Carbatec have a $499 Earlex unit but I am after something a little better. Can anyone recommend a unit for me, or know of a store in Melbourne worth checking out?

    I can only seem to find $500 and $2500 units, nothing inbetween....

    thanks
    Joez

  2. #2
    Join Date
    May 2010
    Location
    Alice Springs
    Age
    50
    Posts
    0

    Default

    These guys do them.

    AA Spray - Fine Finish HVLP Sprayers

    Not having used them before so can't comment on how good they are.

    No affiliation with the company either sorry.

  3. #3
    Join Date
    Dec 2008
    Location
    Tasmania
    Posts
    0

    Default HVLP Sprayers

    Hi Joez,

    Try Apollo or Wagner if you have excess capital at hand. They have a very wide specification range across a number of price points.

    The Earlex unit you reference gives a very good professional result incidentally if you use a quality lacquer and you have the necessary skill techniques. I've used one now for about three years with excellent results but I've only sprayed Shellac and Pre cat lacquer plus some two pack. I don't know how it would go with high viscosity paints.

    Cheers Old Pete

  4. #4
    Join Date
    Jul 2003
    Location
    Melbourne
    Age
    53
    Posts
    1

    Default

    Thanks Talorien and Old Pete.

    I really like the look of those Apollo Units, spoke to the Local Distributor and they only carry a few models, the higher end machine they stock is an older model too when compared to the Apollo Website (offcourse they are like 80% more in Australia too).

    I've emailed the manufacturer overseas as they make a 240v version, well see what they come back with.


    joez

Similar Threads

  1. Setting Up HVLP gun
    By Pete F in forum FINISHING
    Replies: 0
    Last Post: 11th July 2009, 04:06 PM
  2. Wind Turbine / Generator...Anyone building / built one??
    By ptrott in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 16
    Last Post: 19th April 2008, 06:11 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •