mistral air con pumpl units missing parts??

[rgormley]

Is it nomal that the mstral (mss10) or others? do not give you the 1/4 and 3/8 union couplers for the pump??

(the head unit DOES have them...)


i got my lagged pipe to day only to find thet i still need the 1/4 + 3/8 couplers for the pump....bugger it!!! oh well.... hot weather is still a few days away.....

[Timmo]

The flare nuts should be on the service valves.they should have copper bonnets in them to keep foreign matter out of the valves.

[rgormley]

nope! just a plastic screw on cap (looks like a union) but not open just a simple plastic protective cap.


no probs i will get a set from reece / purple pig or such....

[cross]

All the times we have installed splits that have the plastic nuts on the outdoor unit, there have always been the correct flare nuts in a plastic bag along with the other accessories (remote, screws, filters etc). Im guessing you havnt found this bag?

[rgormley]

yes found 2 x plastic bags had inside

bag 1
1 x remote
1 x install manual
1 x operate manual
1 x energy ster (1-6 star sticker)

bag 2
2 x batts
misc screws
misc brick plugins
lagging tape
misc filters

both bags were sealed

hhmmmm??

[cross]

yes found 2 x plastic bags had inside

bag 1
1 x remote
1 x install manual
1 x operate manual
1 x energy ster (1-6 star sticker)

bag 2
2 x batts
misc screws
misc brick plugins
lagging tape
misc filters

both bags were sealed

hhmmmm??

Strange, has i mentioned, we have always found them in one of the bags supplied. Unless there is another bag hiding (perhaps one with a drain plug/adaptor for the outdoor unit if its reverse cycle) ?