Page 1 of 2 12 LastLast
Results 1 to 15 of 28
  1. #1
    Join Date
    Aug 2010
    Location
    Townsville Qld
    Posts
    29

    Default Glueing plastic with super glue + Bicarb of Soda

    I am a computer tech by trade - yeah i know what has this to do with wood but bear with me -. Having 400 odd laptops at the last school I worked at I had to do the odd cosmetic repairs to things like batteries and shrouds around monitors. Now your average laptop plastic case hates superglue as do a lot of plastics and just won't join together without some outside help.

    Here is my tip. Set up your join however you can by clamping etc until you get an almost perfect fit. Dribble in some superglue and then reach for a pinch of Mum's BiCarb of Soda and sprinkle in onto the superglue. It will set like concrete (and about the same colour) in less than 1/5th of a second. It gets hot - dammed hot so don't have any superglue on your fingers when you reach for the bicarb.

    I have used this to repair reading glasses frames, plastic boxes and a few other small items. It isn't water proof so it isn't much good for pump housings and the likes but for things like a cover on a Router, drill case, small plastic boxes etc it works well.

    You can sand and file this and also drill it if needed.
    I found this tip while wading through an old TV Tech website from the USA a couple of years ago.
    The added bonus is that with a couple of different texta coulours you can usually come up with a fairly close match colour wise to what you are repairing.
    I make sawdust with powertools.

  2. #2
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    2,576

    Default

    G'Day Mike,
    That's brilliant, cheap & easy.
    I've used Devcon Plastic Welder http://www.itw-devcon.com.au/index2....d=51&Itemid=75
    a lot [a 2pack expoxy] for lots of plastic repair jobs,
    but you solution is so simple & cheap.
    I'll be forwarding the info to a few friends, thank you.
    Cheers, Crowie

  3. #3
    Join Date
    Sep 2005
    Location
    Cheltenham, Melbourne
    Age
    75
    Posts
    0

    Default

    Good tip, thank you.
    Chris
    ========================================

    Life isn't always fair

    ....................but it's better than the alternative.

  4. #4
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    2,453

    Default

    Bewdy Mike, excellent tip. Worth a five star rating.

  5. #5
    Join Date
    Apr 2008
    Location
    Pacific Haven QLD
    Age
    80
    Posts
    0

    Default

    Great one Mike ...plastics have always been the bane of my life.

  6. #6
    Join Date
    Dec 2008
    Location
    Eastern Australia
    Posts
    60

    Default

    My problem with this would be lifespan. Spending my life fixing domestic electronics superglue was our pet hate. It was often used by people to bomd plastic and all seemed well at the time. A few months later though and the plastic started to deteriorate, turn white and crumble away.
    Am I going to try it ? Sure I am, but the test piece will sit in the workshop for some time.

  7. #7
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    2,576

    Default

    Quote Originally Posted by rrobor View Post
    my problem with this would be lifespan. Spending my life fixing domestic electronics superglue was our pet hate. It was often used by people to bomd plastic and all seemed well at the time. A few months later though and the plastic started to deteriorate, turn white and crumble away.
    Am i going to try it ? Sure i am, but the test piece will sit in the workshop for some time.
    let us all know your results please.....

  8. #8
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    2,453

    Default Recall for Mike...

    Mike...you must surely be able to answer the longevity question?

  9. #9
    Join Date
    Aug 2010
    Location
    Townsville Qld
    Posts
    29

    Default

    Lasted at least 14 months on a couple of projects and still going strong. I haven't noticed any breakdown yet.

    The TV Repairs where to old bakerlite Radio cases, TV Shrouds and Knbs so I would say it lasted a fair while. Mostly my repairs where due to kids dropping their $3000.00 brand new laptops and spliting battery caes and the like. Mr B Will Fixit did fix it and saved some very upset parents a heck of a lot of money having to fork out for items not covered by warranty.

    Superglue Gel and BiCarb works a treat too. I'm not kidding about teh heat though. Gets hot enough to raise a small blister if your not carefull.
    I make sawdust with powertools.

  10. #10
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    2,576

    Default

    G'Day Mike, I sent out your repair tip to a few friends and an old Navy mate sent the following reply,
    though I don't think you'd be allowed to have ether in your school for the purpose of plastic repairs.
    Cheers, Crowie
    Crowie,
    The best plastic glue is ether.
    Sets in seconds, is clear and is as hard as the plastic you are using
    I found this out from a old guy who was in the second world war. They used it to fix the Perspex canopies on the planes.
    To purchase it you need to go to a chemist and tell them what you want it for. They will only give you a 50ml bottle.
    Use a paint brush, small artists type, wipe each side and press together.
    I used to make “on range ammo dispensers” for rifle shooters out of Perspex using this method.
    Did you know that Bakerlite (that they used to use as insulators) is the first commercial use of plastics.
    Cheers, Neil

  11. #11
    Join Date
    Sep 2002
    Location
    Minbun, FNQ, Australia
    Age
    66
    Posts
    1

    Default

    Cliff.
    If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.

  12. #12
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    2,453

    Default

    Quote Originally Posted by crowie View Post
    though I don't think you'd be allowed to have ether in your school for the purpose of plastic repairs.
    But it sure could be useful for other purposes in a school....

  13. #13
    Join Date
    Feb 2008
    Location
    Northern Sydney
    Age
    49
    Posts
    0

    Default

    Interesting tip. Thanks for sharing

    I've noticed that CA accelerator (Mitre Fix Brand) makes things rather hot too. I wonder if it is doing similar things??

    Cheers,
    Dave

  14. #14
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    2,453

    Default

    Most chemical reactions release heat.

  15. #15
    Join Date
    Sep 2002
    Location
    Minbun, FNQ, Australia
    Age
    66
    Posts
    1

    Default

    Quote Originally Posted by FenceFurniture View Post
    Most chemical reactions release heat.
    Don't tell the cook that.
    Exothermic reaction - Wikipedia, the free encyclopedia
    Endothermic - Wikipedia, the free encyclopedia
    Cliff.
    If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.

Similar Threads

  1. Replies: 3
    Last Post: 2nd June 2006, 07:55 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •