Results 1 to 5 of 5
  1. #1
    Join Date
    Jun 2004
    Location
    Mornington Peninsula
    Age
    49
    Posts
    0

    Default Camphor blanket box finish?

    Evening all, I am in the middle of gluing up panels to make my camphor blanket box. Its time to start thinking of how to finish the project. After some investigation in here I am swaying towards a danish oil (or similar finish). My biggest concern is that I want to keep the camphor smell inside the box and not seal it in the wood. Here are the questions that I have...

    1. Do I apply oil to inside and out of box?
    2. Will this seal the smell in the wood?
    3. If I only oil the outsides will this affect the moisture flow rate with seasonl changes?
    4. Not a question but open to other ideas
    It's only a mistake if you don't learn from it.

  2. #2
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    I think you could apply any finish to the outside.
    I wouldnt apply any finish to the inside of the chest as it may seal the aroma which is desirable to deter pests.

    Most antique furniture was never sealed inside so leaving it unsealed inside is not a new idea. Oil and wax finishes dont inhibit timber absorbing moisture very much, but I still wouldn't use them inside an aromatic chest anyway.
    Regards, Bob Thomas

    www.wombatsawmill.com

  3. #3
    Join Date
    Apr 2000
    Location
    Geelong South
    Age
    75
    Posts
    330

    Default

    Leaving the inside un sealed also allows the timber to take the moisture away from blankets etc and stop them from going musty. The same applies for drawers, and is essential for enclosed book cares, which should never be finished inside as the books will go musty and mouldy with time.

    Cheers - Neil

  4. #4
    Join Date
    Jun 2004
    Location
    Mornington Peninsula
    Age
    49
    Posts
    0

    Default

    Thanks for the replies echnidna and neil. I am happy with whats going to happen now and should have some pics in the next couple of weeks with a finished product.
    It's only a mistake if you don't learn from it.

  5. #5
    Join Date
    Sep 2003
    Location
    Weston, ACT
    Posts
    6

    Default Corb's Camphor blanket box

    Hi Corbs

    Interesting posts. See you live in Canberra. Me too. Am thinking of a BBox, with at least some camphor bit(s). Could you please tell me where yo can get it locally?

    Phil Mazey
    Weston 62880840

Similar Threads

  1. Blue Gum, Post Box Finish?
    By HappyHammer in forum FINISHING
    Replies: 7
    Last Post: 10th August 2004, 05:41 PM
  2. The "perfect finish"
    By Angelika D in forum FINISHING
    Replies: 4
    Last Post: 17th July 2001, 12:01 PM
  3. How to determine type of finish
    By Tony Hartwell in forum FINISHING
    Replies: 5
    Last Post: 16th October 2000, 09:42 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •