![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 2 of 2
Thread: TSA001 and Mk3 workcentre
-
9th January 2014, 12:00 AM #1
Intermediate Member
- Join Date
- Jan 2014
- Location
- NSW
- Posts
- 32
TSA001 and Mk3 workcentre
I picked up a used TSA001 and Mk3 with the upgrade saw chassis recently (haven't done any serious woodworking since high school and am looking forward to making a few things without breaking the bank initially!).
It's been a bit of a fiddle trying to true up the saw and the bench, initially I couldn't centre the saw in the top slot without removing the cams from the saw chassis and removing a bit off the stops on the saw locators to be able to locate the saw in the right spot.
Now I have an issue with the height adjuster on the saw, there is some lateral movement when the saw height is changed. My question is - is this fixable?
-
10th January 2014, 04:39 PM #2
Intermediate Member
- Join Date
- Jan 2014
- Location
- NSW
- Posts
- 32
Well it looks like the previous owner of the saw had dropped it, the metal housing was slightly bent where the height adjustment plate mounts onto it.
A bit of judicious force applied and all seems to be well.