![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 11 of 11
Thread: Where to buy spray laquer
-
28th July 2018, 09:10 PM #1
Member
- Join Date
- May 2009
- Location
- Sydney Australia
- Age
- 71
- Posts
- 0
Where to buy spray laquer
Hi all, first time poster to this forum. A few years back, I purchased 4lts of Sherwood Duralc 15% gloss spray lacquer from a Sherwoods distributor out near Eastern Creek in western Sydney
Unfortunately, they went out of business and I have been trying to find a similar product to use on hardwood table tops, etc. I had great results using the Sherwood product.
What are the masses using these days? And where do ya get it in Sydney?
Thanks all in advance. BillyI'm not young enough to know it all.
-
29th July 2018, 02:25 AM #2
China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 140
-
29th July 2018, 10:09 AM #3
GOLD MEMBER
- Join Date
- Aug 2012
- Location
- Imbil
- Posts
- 0
+1 for Mirotone I have used it for many years and always happy with the products.
Regards Rod.Rod Gilbert.
-
29th July 2018, 10:16 AM #4
Member
- Join Date
- May 2009
- Location
- Sydney Australia
- Age
- 71
- Posts
- 0
Great stuff. Thank you.
I'm not young enough to know it all.
-
29th July 2018, 03:45 PM #5
SENIOR MEMBER
- Join Date
- Dec 2012
- Location
- Australia
- Posts
- 60
22croma.com.au are Sherwin Williams Distributors here in Aus. I'm hoping to try Mirotone soon. Just found a local distributor. Best of all, it's Aussie made I believe.
-
29th July 2018, 04:26 PM #6
GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 611
I use Wattyl Stylwood, with Wattyl Rediseal as a sealer, though I think precats are all pretty similar.
I use Wattyl products because I found them best when negotiating discounts.Apologies for unnoticed autocomplete errors.
-
12th August 2021, 04:35 PM #7
... and this too shall pass away ...
- Join Date
- May 2012
- Location
- Brisbane (Chermside)
- Age
- 71
- Posts
- 0
N C Lacquer supplier in Brisbane
Picked up some sanding sealer yesterday, only to discover the PPG product I used to get has been replaced by a much more expensive product ... about $250 for a 20 litre drum. Sharp intake of breath.
Now looking for a supplier of lacquer, sanding sealer and thinners (in 20 litre drums) in Brisbane. Can anybody help? My searches have found only the Mirotone warehouse at Wacol, but the only way to contact them is through the Sydney office, or the local rep (when he answers his phone). It's not possible to rock up to the warehouse and buy product.
-
12th August 2021, 04:45 PM #8
Senior Member
- Join Date
- Feb 2014
- Location
- Bne
- Posts
- 35
Croma coatings, Yatala
-
13th August 2021, 01:49 PM #9
... and this too shall pass away ...
- Join Date
- May 2012
- Location
- Brisbane (Chermside)
- Age
- 71
- Posts
- 0
-
13th August 2021, 02:12 PM #10
Senior Member
- Join Date
- Feb 2014
- Location
- Bne
- Posts
- 35
I use the pre cat and sanding sealer and spray through a stage 5 hvlp.
I think the brand is Shermin Williams
-
16th August 2021, 02:01 PM #11
... and this too shall pass away ...
- Join Date
- May 2012
- Location
- Brisbane (Chermside)
- Age
- 71
- Posts
- 0
Mirotone just quoted me about $198 for a drum of lacquer compared to my old suppliers price of $250. I have used Mirotone's products in the past and been happy with them.
22Chroma quoted $152 per drum of lacquer, but it is a 40 minute one way drive to Yatala, and the Mirotone rep will deliver.
Progress is being made. My heart skipped a beat when my current supplier quoted me $250 for lacquer. So, the question is am I prepared to pay $46 to have the Mirotone product delivered and save over an hour and a half travelling to Yatala. I think this is likely, because the Mirotone product is a higher build product.
Similar Threads
-
Hardener for Laquer?
By rfeyer in forum FINISHINGReplies: 2Last Post: 4th October 2011, 05:46 PM -
acrylic laquer
By big chisel in forum FINISHINGReplies: 4Last Post: 25th June 2011, 08:32 PM -
What Laquer should I use
By Dannys in forum FINISHINGReplies: 3Last Post: 24th November 2010, 12:41 AM -
A buisness to laquer
By wakesetter in forum FINISHINGReplies: 2Last Post: 2nd July 2009, 05:42 PM -
Laquer over shellac????
By gregster in forum FINISHINGReplies: 5Last Post: 26th March 2004, 06:27 AM