Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: E A Berg No4 size plane blade
-
13th July 2014, 01:33 PM #1
Franklin Ferrier
- Join Date
- May 2007
- Location
- Gold Coast
- Age
- 70
- Posts
- 2,429
E A Berg No4 size plane blade
Rather than junk this blade I thought there might be an Berg addict out there that might be interested and knows what it should fit.
The blade is a bit rusty and it does not quite fit a Stanley #4 but is the same size. The slot is a touch too narrow to fit the Stanley adjustment lever (but it wouldn't take much to file to fit) and the cap iron doesn't seem to have enough of a cup in it for the lever cap to push against. As can be seen I also had to hack up a screw to hold them together.
This is not an auction I'll accept a reasonable offer.
berg1.jpgberg2.jpgberg3.jpg
-
13th July 2014, 02:50 PM #2
The prize lies beneath - hidden in full view
- Join Date
- Oct 2010
- Location
- 1017m up in Katoomba, NSW
- Posts
- 9,554
Fuzzie! WAIT! If you add a cap iron from Lee Valley (for ~$30), and as you say, file the mouth, you'll probably have a set up that you're glad you kept.
